HID installation

[MaT_D]

Hi all just wanted to know if anyone here know of anyone that maybe able to install a HID kit for my 06 Jazz?

:D

[destrukshn]

where are you located?

[jayesse]

It's easy man...just pop the front bar off (takes about 5 mins) and go from there.

It makes it so much easier to access everything to mount the wiring and ballasts, etc so you can hide it all nicely and to take the headlights out and fit the bulbs without squeezing your hand up through the inner guard.

Takes about 1.5 hours for s clean job from beginning to end.

Give it a go yourself...you can't break anything

[MaT_D]

i'm at sydney.

Hey jayesse have you got any diagram that maybe so use for me?

thnxs heaps guyz

[jayesse]

Ummm...I know there is a diagram somewhere on how to take it off. I've done it so many times now I just know.

If it's not here I'm pretty sure it's on AusJazz.

You just need to pop the 4 clips out at the top (between the headlights)

Take the screws out where the fender meets the guard (there is one on each side)

then pop out the clips that run underneath the front of the bar (there might be 2 bolts under there too - mines a mess now as I have lost a couple so not sure)

Then just rip the front bar off.....you need a bit of effort as it is clipped on, but don't be affraid to use a bit of force.

Going back on is easy....it all lines up nicely!

I'll see if I can find the diagram....