View Full Version : CRV motor in da9, opionions.
STARTSat7
20-07-2007, 09:29 AM
Hey guys i just picked up a crv motor which was previously in da9 for $500, you guys know of any 1 with this conversion? if so input please! its done
106 xxx. What you reckon?
tseesinngwailo
20-07-2007, 09:37 AM
What type of motor is it? B20? sounds like a nice tourqey conversion, put a B16A head on it and Vtec Yo!!
FR33K
20-07-2007, 12:05 PM
yeh will bolt straight in
nice torque but dont thrash it too much ;)
sikisdr69
20-07-2007, 02:22 PM
bolt vtec head, frankenstein conversion;)
JHMDA9
20-07-2007, 08:45 PM
It can be done.
z3lda
22-07-2007, 10:46 AM
if your keepin the b20 stock, you'll have to change the intake manifold or else it would fit under the hood
u can replace it with a b18a/b intake manifold
STARTSat7
23-07-2007, 06:00 PM
yeh its actually sitting in a da9 atm so yeh...... 500 is for the da9 shell (everything CLEAN) and the motor...so yeh kinda of a bargain only let down = auto -_-
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.