Fitting HIds....

[jjj23]

Does anyone know how to fit HIDs in to my Civic 2007 FD?
i have no idea .......:P
thanks!

[Shimian]

Well, so far ive gathered this from reading all the posts. You install them as you would when changing your halogen globes. It is shown in the manual how to change it. Then you will also need to mount the ballasts somewhere under the bonnet where its not hot or where water could get to it. Just follow the instructions on your HID kit on wiring it up.

Someone correct me if im wrong.

[thaaznboi]

it is very simple and straight forward. remove your old bulb n insert the new ones in, once that is done your ballast will have to wires with connectors one goes to the actual bulb itself and the other one goes into you orginal plug that was on ur old bulb then your all done. just find a safe spot to secure your ballast n thats it.
and yes your package should come with a wiring diagram so just follow that if you are not sure.
good luck with it!

[jjj23]

Thanks Guys!

[sitta]

you may need to dril a hole on the plastic cover ( if it does have a cover) for the wire to go to the ballast in the engine bay, my ctr hid got a cover so i drilled the holes