FN2 milltek Exhaust [Archive]

GupZ

31-07-2007, 05:40 PM

Just read the UK type-r forum..noticed that Milltek exhaust has been released for FN2, and required to remove the tail trim in order for installing it. What do you guys think abt Milltek in terms of its quality & reputation?

http://www.civictype-r.co.uk/forum/viewtopic.php?f=90&t=142335&st=0&sk=t&sd=a&start=80

http://i186.photobucket.com/albums/x166/Gupz4148/fn2exh2.jpg
http://i186.photobucket.com/albums/x166/Gupz4148/p1010035.jpg
http://i186.photobucket.com/albums/x166/Gupz4148/P1010034.jpg
http://i186.photobucket.com/albums/x166/Gupz4148/P1010032.jpg
http://i186.photobucket.com/albums/x166/Gupz4148/P1010030.jpg
http://i186.photobucket.com/albums/x166/Gupz4148/P1010029.jpg

Chris_typer

31-07-2007, 06:19 PM

They are a pretty reliable brand only thing whether you actually want to remove the tail trim of the car in order to install this exhaust system.

SPEEDCORE

31-07-2007, 06:24 PM

Very good brand! VW crowd should agree.

GupZ

31-07-2007, 06:36 PM

do you guys know how could i order the cat back in Australia?

lukits01

31-07-2007, 08:52 PM

ABP from the CTR forums will send it over to OZ

While we're on the subject of FN2 Exhaust

here you go, CPL prototype FN2 Headers
(note there is no cat-converter)

http://img112.imageshack.us/img112/6365/015jb3.jpg

Chris_typer

31-07-2007, 08:54 PM

Thats not bad..would you happen to know some sports exhaust tips you can get for the R in Aus? Cuz i dont really want to lose my rear tail putting the milltek exhaust system in.

BusterSonic12

31-07-2007, 09:07 PM

Thats not bad..would you happen to know some sports exhaust tips you can get for the R in Aus? Cuz i dont really want to lose my rear tail putting the milltek exhaust system in.

Changing tips alone won't give gain, should get a catback. If you thinking about to change the tips to a bigger size, then you might lose back pressure, in a N/A car, back pressure is very important.

do you guys know how could i order the cat back in Australia?

where about are u? if sydney, try IS Motor Racing, Pro Concept, or our OH trader, JDMyard or JDMconcept

Jaso

31-07-2007, 09:16 PM

It would be possible to get the Milltek system and still retain the original tips somehow?

350G

31-07-2007, 09:17 PM

the exhuast made the car looks even worse

Chris_typer

31-07-2007, 09:21 PM

the exhuast made the car looks even worse

Can I ask why, if you clearly hate honda's so much, do you post in the forums? Because clearly you don't seeing your reply to other topics in the forum. Just don't see the logic.

It would be possible to get the Milltek system and still retain the original tips somehow?

Well thats what I wanted to know aswell, because if you could then I would probably look at getting one.

GupZ

31-07-2007, 09:41 PM

Changing tips alone won't give gain, should get a catback. If you thinking about to change the tips to a bigger size, then you might lose back pressure, in a N/A car, back pressure is very important.

where about are u? if sydney, try IS Motor Racing, Pro Concept, or our OH trader, JDMyard or JDMconcept

I may probably go and find indy for the milltek cat back ..LOL...

GupZ

31-07-2007, 09:43 PM

Can I ask why, if you clearly hate honda's so much, do you post in the forums? Because clearly you don't seeing your reply to other topics in the forum. Just don't see the logic.

Well thats what I wanted to know aswell, because if you could then I would probably look at getting one.

Hey Chris..look at this..is this what you after?

http://i186.photobucket.com/albums/x166/Gupz4148/260bhp2ca5.jpg

have no idea how they did that

GupZ

31-07-2007, 09:44 PM

the exhuast made the car looks even worse

go away..u nub

BusterSonic12

31-07-2007, 09:45 PM

I may probably go and find indy for the milltek cat back ..LOL...

hahaha sweet, so you are from sydney. Indy's a cool guy LOL i need to look for him soon too ^^ hehe
what mods u got equipped on the k20z3 =p so far?

GupZ

31-07-2007, 09:47 PM

GupZ

31-07-2007, 09:49 PM

hahaha sweet, so you are from sydney. Indy's a cool guy LOL i need to look for him soon too ^^ hehe
what mods u got equipped on the k20z3 =p so far?

Just bought the car for 3weeks....still searchin for the after market parts for mod........:(

BusterSonic12

31-07-2007, 09:50 PM

Just bought the car for 3weeks....still searchin for the after market parts for mod........:(

ya it's bit hard, since it's uk, try the uk forums. :p no JDM for u hahaha
i read somewhere that gruppe m is developing for fn2

GupZ

31-07-2007, 09:54 PM

ya it's bit hard, since it's uk, try the uk forums. :p no JDM for u hahaha
i read somewhere that gruppe m is developing for fn2

i know there are a lots and lots of owner in UK send e-mails and requesting gruppe m to develop the induction box for FN2...read from the UK CTR forum

Chris_typer

31-07-2007, 10:02 PM

Thats exactly what I'm looking for, see it retains the original design at the same time giving you extra performance...I would probably inquire about getting this.

lukits01

31-07-2007, 10:03 PM

Where do you find this?

My sources :p

while we're at it heres the dyno sheet

Chris_typer

31-07-2007, 10:08 PM

My sources :p

while we're at it heres the dyno sheet

Quite impressive...well seeing as most of us are located in sydney should organise a meet up sometime and go for a cruise.

lukits01

31-07-2007, 10:12 PM

and a picture of the full stock exhaust system

http://img111.imageshack.us/img111/5120/fn2stockexhaustfj9.jpg

Tofu

31-07-2007, 10:14 PM

what's the reflash done on that car in the dyno?

the stock exhaust looks good already, but this system just doesn't look "refined" the tip isn't even sticking out straight. But i'm just nit picking now...i know this is a great brand!

GupZ

31-07-2007, 10:21 PM

Just been to the CPL website and noticed that Hondata Group N Plus ECU is now complete. £649 HP gain as follow:

http://i186.photobucket.com/albums/x166/Gupz4148/FN2LAUNC.gif

BusterSonic12

31-07-2007, 10:24 PM

Just been to the CPL website and noticed that Hondata Group N Plus ECU is now complete. £649 HP gain as follow:

http://i186.photobucket.com/albums/x166/Gupz4148/FN2LAUNC.gif

that's around 129.3kw at the wheel.
these ecu reflashes are done with I/H/E right?

GupZ

31-07-2007, 10:37 PM

that's around 129.3kw at the wheel.
these ecu reflashes are done with I/H/E right?

i think so :eek:

BusterSonic12

31-07-2007, 10:42 PM

i think so :eek:

not that good result i reckon, if it is reflash + i/h/e comin' from a type r

lukits01

31-07-2007, 10:46 PM

that's around 129.3kw at the wheel.
these ecu reflashes are done with I/H/E right?

no its completely stock car, exept for the ECU
the other dyno sheet with 177hp is with I/H/stock exhaust and CAI

GupZ

31-07-2007, 11:00 PM

In conclusion, we ve got these parts for mod:
1. Hondata ECU
2. Milltek Cat back
3. AEM intake
4. CPL prototype FN2 Headers

Any i missed?

BusterSonic12

31-07-2007, 11:14 PM

In conclusion, we ve got these parts for mod:
1. Hondata ECU
2. Milltek Cat back
3. AEM intake
4. CPL prototype FN2 Headers

Any i missed?

just wait awhile, it will come. too bad no spoon for your R :p
u going down to eastern creek this sat to visit mr spoon?

Tofu

31-07-2007, 11:17 PM

anyone know how much the Milltek exhaust costs?

GupZ

31-07-2007, 11:46 PM

just wait awhile, it will come. too bad no spoon for your R :p
u going down to eastern creek this sat to visit mr spoon?

Mr spoon?.?

BusterSonic12

01-08-2007, 12:11 AM

Mr spoon?.?

bit offtrack =)

Mr. Ichishima Tatsuru (head of spoon sports) is going to eastern creek this weekend with circuit club, because pro concept being a official seller/ workshop for spoon in australia. i m guessing there are going to be couple of spoon race cars too

GupZ

01-08-2007, 12:31 AM

bit offtrack =)

Mr. Ichishima Tatsuru (head of spoon sports) is going to eastern creek this weekend with circuit club, because pro concept being a official seller/ workshop for spoon in australia. i m guessing there are going to be couple of spoon race cars too

@_@....love spoon race car very much~

Chris_typer

01-08-2007, 01:52 PM

In conclusion, we ve got these parts for mod:
1. Hondata ECU
2. Milltek Cat back
3. AEM intake
4. CPL prototype FN2 Headers

Any i missed?

Got any prices for these mods and where abouts we can prob get them from?

STTICH

01-08-2007, 01:58 PM

http://i186.photobucket.com/albums/x166/Gupz4148/260bhp2ca5.jpg

sorry for the rather off topic.

but :eek: do they come in white (!!!!) in some other countries?

Chris_typer

01-08-2007, 02:24 PM

sorry for the rather off topic.

but :eek: do they come in white (!!!!) in some other countries?

Nope, don't think so. But some companies in the UK actually customise it for you..so you can get it done.

BusterSonic12

01-08-2007, 05:34 PM

Got any prices for these mods and where abouts we can prob get them from?

try to contact, JDMyard or JDMconcept (ozhonda's trader) they can usually source it for you, or can try the racing performance workshop (e.g. IS MOTOR RACING, pro concept) they can usually get anything you want.

Chris_typer

01-08-2007, 06:06 PM

try to contact, JDMyard or JDMconcept (ozhonda's trader) they can usually source it for you, or can try the racing performance workshop (e.g. IS MOTOR RACING, pro concept) they can usually get anything you want.

Ok sounds good..I'll check it out.