neon light wiring please~~

[totojojo]

hey guys, i just got a led light for my gd3.
i m just wondering how to do the wiring.
here is the pic of the led.
http://blufiles.storage.live.com/y1plbww-A0iYOySyZ9c_0jtRsCldQuCSipZgy0WDCw82v4N5jP9MWWanLM V0YrdipQInpoKae9In1s

[Bayani]

get a swtich. LOL

Hook up positive to red near ignition, and ground to bare metal on your chassis.

[totojojo]

wow, too hard for me.
i know nothing about this. lol

[Bayani]

Don't even try then. - looking close, there isn't a transformer. Unlikely that the LED's = 12v.

[LSD GD3]

i need it light up with the headlight, and i gonna put it under the dash

well now what you need is
to run the red wire to the headligh wire in the fuse box .. or the light wire from the headunit or anything that lights up when you turn on the headlight but from what you said don't sounds like you wants to try ..

My Advice Pay someone
http://img360.imageshack.us/img360/2333/normalstereocircuit6ju.png

[kraiye]

Don't even try then. - looking close, there isn't a transformer. Unlikely that the LED's = 12v.

i think all you need is the right resister. my bonnet LEDs go direct to 12v circuit with one inline resister. if this is a car kit, it's probably ready to install :thumbsup:

[LSD GD3]

i think all you need is the right resister. my bonnet LEDs go direct to 12v circuit with one inline resister. if this is a car kit, it's probably ready to install :thumbsup:

no don't need resister it already has it is 12V ready!!

[totojojo]

so, about the fuse box, how to know which is headlight?

[beeza]

Honestly just pay someone to do it and watch and learn.Electrical stuff is tricky...

[GIPONU]

hey i have the same neons!
cept mine has a adaptor to plug into the cigi hole.
and has a swith on teh adaptor to turn it on and off

[totojojo]

hey i have the same neons!
cept mine has a adaptor to plug into the cigi hole.
and has a swith on teh adaptor to turn it on and off

sounds good.
i went to a workshop, said it may cost $100 to do the wiring

[totojojo]

isnt thta the small neon u can get for $10 in super cheap auto?

i bought it in china for around AUD$20.

[beeza]

Do as much as possible like the mounting and running the wires to the correct position and just get them to do the connecting of the wires.Cause it's a time thing,like $60/hr or something ridiculous.
Make sure they know you've done as much as possible so they know your on a tight budget and looking for the cheapest price.And hang out when he does it so you know it took him an hour or 10 mins so he will not overcharge you.

[GIPONU]

isnt thta the small neon u can get for $10 in super cheap auto?

no, thats the tube ones.
this one, i dunno where the previous owner bought them, but i also have the ones from supercheap but are busted. cos i have the smalll ones at the leg area. and *kick*

[reactiveman]

Grab a volt meter. Locate your fuse box in the cabin, red to bare metal and start sticking the black into the fuse slots. if you want constant power to be able to turn the neon on or off without having to turn the car on then keep on the lookout for a reading of 12.