dunno how to install HID headlight to 93 integra dc2 vtir

[jame_cyp]

hi guys, i got a set of hid kit. i tried a lt of time to install it.... but it still doesnt work.. my frd s 95 integra vtir , he juz intechange stock wire...then work.. i tried it.. but it doesnt work... then i put my normal bulbs on.. it still work....
how........

[xenonkuraz]

http://ozhonda.com/forum/showthread.php?t=72154

Give that DIY a look. If you're still coming across problems, I'd suggest you check the points of the harness' and make sure that they are touching (mine wouldn't, but with a little modification = :thumbsup:)

If all the cables are fitting perfectly, try to determine whether or not the actual units are working by running them straight off the battery.

Have you turned on the engine before trying the lights? They will not have sufficient power to run otherwise.

If all else fails, I would suggest that you have faulty ballasts/bulbs and should bring them back for a replacement!

[Jamezy]

with dc2 integras its really just plug and play ..

make sure you get the right hid head light lamp wattage mine are 35 Watts

all DC2 weather they are pre face lift = 1993 to 1997 model

or face lift model = 1998 to 1999 model all use same bulb type which are

HB4 bulbs

make sure the ballest are tied down as well so that it doesnt fall off or move around i used zip ties which can be purchased at any hardware store

and make sure the wire connection to the bulbs are connected properly

goodluck :thumbsup:

[xtat1k]

all basically plug and play .