DIY - Mugen Pedals for Civic FD2

[Shimian]

Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!


Aim: To install Mugen Pedals on FD2

Required:
- Mugen Pedals
- Drill (to make it easier) with a small drill bit and a + head
- Philips head (will take a while)
- Allen key for the pedals (not sure what size, but its small)
- A marker

Steps:

http://members.optushome.com.au/~shimian8/Pedals/Pedals1.JPG

http://members.optushome.com.au/~shimian8/Pedals/Pedals2.JPG

http://members.optushome.com.au/~shimian8/Pedals/Pedals3.JPG

http://members.optushome.com.au/~shimian8/Pedals/Pedals4.JPG

http://members.optushome.com.au/~shimian8/Pedals/Pedals5.JPG

http://members.optushome.com.au/~shimian8/Pedals/Pedals6.JPG

http://members.optushome.com.au/~shimian8/Pedals/Pedals7.JPG

http://members.optushome.com.au/~shimian8/Pedals/Pedals8.JPG


- Place the mugen accelerator over the oem accelerator. Once you are happy with the alignment, use the marker to mark the holes.

- Remove the mugen accelerator and use the drill with the small drill bit to make a small hole, making it easier later to install the screws.

- Put the mugen accelerator back on top of the oem accelerator and install the screws. Tighten it securely.

Make sure you tighten everything. Use your hands and grab onto the mugen brake and accelerator and pull/move it. If it does move, then you have successfully installed it. If you feel that it wobbles a bit, then check the screws and tighten it.

http://members.optushome.com.au/~shimian8/Pedals/Pedals9.JPG

[Sensei]

Nice write-up. How're the pedals holding up?

[Shimian]

Sits rock solid. After installing it, i grab and wiggle the brake pedal, it does move. The accelerator too. You just need to make sure all the bolts and screws are tightened to a point where u cant turn no more. If youre worried, use 3m tape to help support.

[NightKids]

That's nice, where'd u pick them up from? They're replicas yeah?
And gloves FTW!

[Shimian]

Yeah. Replicas. No diff vs original except price is like 1/4. Got them from overseas. LOL, i always use gloves when i do stuff to my car

[Zdster]

It should be noted, that it is illegal in vic. to install metal pedals on a car that came with rubber pedals OEM. Otherwise, good write up/job :thumbsup:

[danny_mart]

do you have the website from where u got them...hopefully they have manual ones to...good write up


Yeah. Replicas. No diff vs original except price is like 1/4. Got them from overseas. LOL, i always use gloves when i do stuff to my car