PDA

View Full Version : ACURA TSX Speedo



melloy_honda
21-08-2007, 05:12 PM
Has anyone looked into fitting the TSX speedo assembly into the Euro? The TSX dash looks sweet with the independent Taco and Speedo!

040501912
21-08-2007, 05:28 PM
mind u thats the speed is mph and .. the odos are on miles :)

r-r-redEuro
21-08-2007, 06:23 PM
post a pic of the tsx speedo ?

tony1234
21-08-2007, 06:32 PM
mind u thats the speed is mph and .. the odos are on miles :)
I think the TSX speedo shows both mph and kph but the odo is in miles.

yfin
21-08-2007, 07:01 PM
cant be done - it has been tried before and the plugs at the rear of the TSX dash do not match the Euro

yfin
21-08-2007, 07:02 PM
I think the TSX speedo shows both mph and kph but the odo is in miles.

In canada it shows kph

http://www.tsxclub.com/forums/attachment.php?attachmentid=1495

yfin
21-08-2007, 10:02 PM
http://www.familycar.com/RoadTests/AcuraTSX/Images/Cluster.jpg

EUR003act
21-08-2007, 11:02 PM
they look f*#&en awesome!

someone buy a TSX dash and a Euro dash, send them to me, ill make you up a conversion harness, and send it back free of charge...

mmmsxc
21-08-2007, 11:04 PM
thats bloody awesome. wish i could get one

J-TODA
21-08-2007, 11:20 PM
waaa thats so nice....everythings symetrical =] very clean and tide... love the blue lining..

melloy_honda
22-08-2007, 08:11 AM
I'd love the look of that in my Euro... Oh well i'm sure there will be a conversion kit sometime!

melloy_honda
22-08-2007, 08:23 AM
Does the TSX one have a trip computer??

mrpayner
22-08-2007, 06:11 PM
that's f'ing hot.. symmetry is a wonderful thing..

melloy_honda
23-08-2007, 08:12 AM
FYI, I was looking in a magazine this morning and just at a glance the new CRV Dash looks very similar to the TSX? I'm wondering if its the same part?

melloy_honda
23-08-2007, 08:16 AM
http://www.honda.com.au/wps/wcm/connect/internet/Honda.com.au/Home/Showroom/CRV/Gallery/

tony1234
23-08-2007, 08:26 AM
The TSX dash does look good but i think this is one of those projects that will have to go into the too hard basket(too much $$).

aaronng
23-08-2007, 08:42 AM
FYI, I was looking in a magazine this morning and just at a glance the new CRV Dash looks very similar to the TSX? I'm wondering if its the same part?
No it's not the same. The closest one would be the JDM Inspire.

^__^ SM ^__^
23-08-2007, 10:48 AM
WOW VERY NICE! I want the TSX dash too. Looks similar to the IS250 Optitron too... but cleaner... the Lexus's looks too messy like a Breitling watch.

ig3o
23-08-2007, 12:03 PM
thats hot

xanctus
25-08-2007, 03:07 PM
Yeah, used to live there and driven TSX many times...I was quite dissapointed with dash of accord euro. But then I realized, that accord is accord. Whereas Acura is a luxury for honda. I guess, it just a matter of marketing approach by honda.

killua888
28-08-2007, 11:10 PM
Does the TSX one have a trip computer??

lol, its right in the middle isnt it?

minircc
07-09-2007, 08:44 PM
Has someone figured out how to do this? I have googled hard on this topic but have not found much. It seems that only the US TSX has that dash, whereas Aust and Jap have standard one.

I really want to have this done!
Anyone know where i could buy a cluster?

Hans Bond
07-09-2007, 09:51 PM
try ebay canada

yfin
07-09-2007, 10:11 PM
Has someone figured out how to do this? I have googled hard on this topic but have not found much. It seems that only the US TSX has that dash, whereas Aust and Jap have standard one.

I really want to have this done!
Anyone know where i could buy a cluster?

Noel on TSX club already tried this and concluded that the harness connections are different. Unless you want to start stuffing around with splicing the harness (which is not a good idea anyway) this is a tough job. It is not plug and play.

minircc
08-09-2007, 08:34 AM
are there connectors you can buy that are same as that of clusters?
then i can play around with wires without having to cut car connector.

i have found a few US sites that say, connectors are different, but wiring are all the same colors, hence just have to match them up.

i am willing to try, but don't want to cut original car connector.. :(