Installing HID's on a Jazz [HELP]

[lilwilliam]

Alright i brought a 8000K HID kit Hi/Lo beam for the jazz 06, model, now i have came up with a problem where the hid will turn on when the high beam is turned turned on via the turning signal flicking thing, and the high beams, and the high beam also works at the same time, however the Hid lights do not turn on when normal beams turn on although there is current running through it i have tested this using the current tester. can anyone shed some light as to why it does not work?

*i dont know where this post belonged so i put it here mods feel free to move this thread

[[HIREVZ]]

i heart lilwilliam

[040501912]

chinese hid i presume :p check the cables on ur plugs in the right positions. usualy they have defected cable places on the plugs. example

ground be the negative plug
negative be the plus
plus woild be ground

[shadou]

I've installed a couple Chinese HID's before. They were pretty straight forward although some of the sockets wouldn't click in so I had to use a fair amount of force to push em in. Are you absolutely positive you've installed them properly? And why in gods name would you want HID high beams, I mean the low beams ought to blind a couple people already...

[destrukshn]

have to re wire it
lol
lol.

[lilwilliam]

have to re wire it
lol
lol.

yes the plugs did not match up so i cut the light plud adapter
and hooked it up to the cars light adapeter however it still does the same thing

[destrukshn]

no, you have to re-wire it, becuase they wired it wrong.
lol.

[lilwilliam]

does anyone have a the wireing diagram ?

[lilwilliam]

no, you have to re-wire it, becuase they wired it wrong.
lol.

yes i know what u mean, what i ment was that i cut the wires from the HID harness and just hooked it up the the jazz's lights the way it is suppost to, i found out which colours were what by using a tester. still no good.

[QuintessentiaLs]

probably blown the fuses since u wired wrong

[destrukshn]

the way it's supposed to, are you sure?
it's a common positive, and separate negatives.

[lilwilliam]

hmmm... ill check the fuses, johnny what do you recommend i do now

[destrukshn]

you pay me to do it
lol.

too complicated to explain it
lol.

[lilwilliam]

you pay me to do it
lol.

too complicated to explain it
lol.

cheeseburger meal?

[destrukshn]

comon bro, you can do better than that.
lol

[lilwilliam]

problem solved mods please close.

[misteR_bilzz]

hj. n it doesnt stand for hungry jacks

[Amusevtec]

told you it was the fuses man!