Projector lights (Sonar) from overseas- RHD/LHD question

[Ry_]

Just bought these and they arrived today:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&sspagename=ADME%3AB%3AEOIBSAA%3AUS%3A11&viewitem=&item=200141511777

Was wondering if they need to be adjusted in case they project onto the oncoming traffice (read in one of the threads that buying lights from the US might do this).

Has anyone installed these lights, and if so have there been any issues?

Thanks.

[Jamezy]

in most cases yes you do have to adjust them, becuase your lights dont come with projectors stock .. when adjusting face it to a wall and remember the passenger side light must be a bit higher then the driver side just so when your driving it wont blind on coming traffic and also you hav a more broader view on the passenger side at night

[Ry_]

So much for plug and play.. lol

Can't seem to see a straightforward means to adjust it- advice from anyone who's done this before?

Thanks!

[Jamezy]

just take a long phillips head screwdriver and put it straight down between the little hole in the frame near the headlight you should see little gears (grey in colour i believe ?) and just turn it make sure u are doin this against the wall with your headlights on to see the beam of the light go up or down basicly spin the screw driver and you should see the light move up or down .. this is for the stock headlights

[Ry_]

Can't seem to find the hole you're referring to, or gears.. could you please elaborate? Thanks!

[slowly]

some of the projector were not adjustable

[ACTI0NMAN-1]

to adjust properly, you have to pull the projectors apart, then flip the projector lens cutoff plate. Then re assemble. Thats the correct way.