Brake light issues with EG9 loom in EG4

[eg92b16a]

I have only just noticed this, but I seem to keep blowing the drivers side brake light. Just changed one and noticed that when I put my foot on the brake, the parkers turn on as well as the brake lights. When the parkers are on, the brake lights are on also. When I disconnect the drivers side bulb, everything returns to normal. Could this be because the loom I have from my conversion is a sedan loom?
I'm sure it's only going to take a couple of wire to be changed.
Has anyone some across this before, and how can I fix it?

[Boban]

I'm not 100% on this but maybe you got a bad ground somewhere or an extra ground so it keeps blowing??? Have you tried piggybacking a +ve wire from the other side and see if that works???

If you need any help drop me a pm mate and we can have a look at it together, i'm on the south side too

[bennjamin]

sometimes if the ground wires are not connected properly, the lights can play up and start blowing globes..
i suggest check all your ground wires first...

[eg92b16a]

Thanks guys.:thumbsup:
I checked all the ground wires, OK.
I noticed that the blown bulb I took out was only blown for the park light. THe brake bulb is OK. If I put that bulb back in, everything OK except no parker on right side. When I put new one in everything goes haywire.
Long story short, tried another bulb, all is OK. Dodgy bulb from new.:confused: