Sexc86
28-08-2007, 09:38 PM
Hey guys
doing some suspension mods and its been a while since i have ripped off the front wheels and scoped out the controll arm setup. As i have never had a swaybar (stock or aftermarket) setup, find it hard to visualise the fronts. As rears i am replaceing the LCA with sway bay mount holes but is this the case with the fronts too? do the front controll arms have any bearing on what sway bars you can use if any at all?
found a us company that seem to make some pretty wild front LCA's or EG and Dc2.
http://www.omnipowerusa.com/product.asp?P_ID=135
anyone useing these? any actually purpose for these arms if not needed for a front sway bar?
think thats about,
Thanks in advance guys
Lyle
doing some suspension mods and its been a while since i have ripped off the front wheels and scoped out the controll arm setup. As i have never had a swaybar (stock or aftermarket) setup, find it hard to visualise the fronts. As rears i am replaceing the LCA with sway bay mount holes but is this the case with the fronts too? do the front controll arms have any bearing on what sway bars you can use if any at all?
found a us company that seem to make some pretty wild front LCA's or EG and Dc2.
http://www.omnipowerusa.com/product.asp?P_ID=135
anyone useing these? any actually purpose for these arms if not needed for a front sway bar?
think thats about,
Thanks in advance guys
Lyle