will it fit? or not? tegz=vti-r

[tezza88]

hey ozhonda members im still new to this forum;
but i'd thought this is a place where i may find some help with some car issues, wells first of all i just wanna know if this lip is suitable for a honda integra vti-R ?? ( and if its a for sure yes - where my i get it - im in sydney )

any help at all?

http://i224.photobucket.com/albums/dd127/cool_jellyfish/asd-1.jpg


thanks

[Dell99]

dun kno if it is a lip or not as i can't c the lines
probably a full bumper i say

just my guess

[Spunkymonkey]

it looks like a bottom lip attached to half stock bar.... this car is post face uplift so you would need to check whether it would fit your car. Face lifted tegs are 97 up

[Jamezy]

it depends if your integra is a pre face lift or a face lift wether that lip will fit

this is a pre - face lift model

http://i185.photobucket.com/albums/x59/Jamezy_88/dc2p1-1.jpg

and this is a face lift model

http://i185.photobucket.com/albums/x59/Jamezy_88/bigandlittle016tuned-1.jpg

notice the headlight shape and the corner blinker lights of the front bumper is different face lifts are 97 and above and also the rear bumper is different as well

[DUST]

I thought that was this lip, but that red car is just the facelift DC2.

[Jamezy]

I thought that was this lip, but that red car is just the facelift DC2.

yes i noe it is thats wat i explained ..

[teaseR]

that just looks like a type r lip

[hai]

that looks like a lip thats added on for AUDM facelifts .. think you'll need to change you're whole facelift and then add the lip..

because the vtir bumper is made together with its facelift ; which cant be taken off, but you may add a lip below the facelift. which wouldnt get you what you' wanted.

good luck.. cheerrs

[tezza88]

ahaha thanks everyone glad you've paticipated to help - But for now wonder where i may get a facelift from

[T-onedc2]

So far it can be established that the red DC2 pictured is 98+ (late 97) onwards with a lip which hangs a little lower than a Type R lip. It is however not a replica either.

It's very rare to see a lip other than Type R lip available for facelift models, as most either buy a Type R lip or get a JDM front conversion which has many aftermarket lips available.

[tezza88]

thanks guys, jst wna know if any1 know of places where i could get the bumper for the face lift so at least i can get a start on it, quite frankly, its pretty hot
:p

[Dy_]

thanks guys, jst wna know if any1 know of places where i could get the bumper for the face lift so at least i can get a start on it, quite frankly, its pretty hot
:p

You'll need more than jsut the bumper..

bumper, lights and parkers

basically to do a face lift its not a matter of only changing the bumper.

[T-onedc2]

yep you will need bumper, headlights, parkers.

[z3lda]

You'll need more than jsut the bumper..

fenders, bumper, lights[not too sure about that on integra].

basically to do a face lift its not a matter of only changing the bumper.

you dont need fenders

[z3lda]

tsumani lip

http://www.modacar.com/products/Acura/Integra/INTBK/

that make them for both preface lift and face lift .

[tezza88]

mate, ur my hero, thanks alot

[yourfather]

seriously, if you're going to give information to a guy, give it right, like z3lda did, or don't give anything at all.

And i'm not talking about DY_, because he is more correct than half of you insane f*cks