PDA

View Full Version : [BNE] EK foggies installation cost


Ry_
03-09-2007, 02:38 PM
Hi all,

Was wondering whether anybody (BNE) has taken their foggies in to a workshop to get fixed up (where and rough costing).

I've got the part, but I'm not sure about attempting it on my own because I don't want to wire something wrong and have it blow. Took a look at some online instructions and it looked pretty involved.

Any thoughts? Thanks again! You guys rock.
Zdster
03-09-2007, 03:22 PM
I take it its not an OEM kit? If it is, then you just plug and play.

Since you are in Brisbane try speaking to Barefootbonzai as I am sure he can help you out/point you in the right direction.
Ry_
03-09-2007, 03:29 PM
It's not OEM, but looks like everything would be plug and playish. Not sure about where to draw current from and fuse and things (haven't looked to see if it comes with that). I'm not terribly electrically minded as you might be able to tell.

But yeah, will prolly send him a PM- thanks for the contact!
Boban
03-09-2007, 03:34 PM
where abouts r you man, i can have a look. i did mine, not honda genuine but a plug and play so it was easy
kn1ghtm4r3
03-09-2007, 04:52 PM
yeah its pretty straight forward =)

i just looked online before installing to get an idea then wen it came it was easy as =)
Ry_
03-09-2007, 04:54 PM
Thanks man! PM sent.
vteccoupe
05-09-2007, 12:52 AM
hi u able to share wat is the website that shows how to install facelifted ek civic installation of foglights? cheers:thumbsup:
Ry_
05-09-2007, 01:05 AM
http://handaccessories.com/civic/civicfoglights.pdf

Hope this helps :) Found it earlier.
vteccoupe
05-09-2007, 03:37 AM
cheers 4 dat ! :thumbsup:


http://handaccessories.com/civic/civicfoglights.pdf

Hope this helps :) Found it earlier.
Ry_
08-09-2007, 01:12 AM
Cheers for the help everyone. Much appreciated. Boban, you're a legend. +rep! Great to meet you and thanks for the help! Will post pictures of the new installation soon :D
Boban
08-09-2007, 08:35 PM
I'm glad you like it.
Also the web address (http://handaccessories.com/civic/civicfoglights.pdf) was useless when we did the install. Not sure if it's for USDM or whatever country or whichever it may be but we had to improvise a bit. It came in handy when we cut up the bumper but the electrics were wrong. If anyone needs any help feel free to PM me or Ry and we'll explain it (or try to :p)
Ry_
09-09-2007, 05:58 PM
mm. Instructions mention a one pin clip taped with blue tape just under the washer reservoir. Was nowhere to be found. Made the installation more tedious, but not impossible.

Anyway, the foggies have now been installed, and they look alright I think :) Even better when they're on.

http://byry.com.au/images/IMG_6822.jpg

http://byry.com.au/images/IMG_3608.jpg
kn1ghtm4r3
09-09-2007, 07:27 PM
looks good man. just dump the ride its flying lol