how to remove EK power window motor

[kn1ghtm4r3]

hey guys how can you remove the motor out of the door and replace it? anyone done it before?

[Zdster]

Very straight forward. Remove the door trim. (If the window is electric, reach inside the door and unplug the wiring). Wind down the window so that you can see the bolts that hold the window to the actuator. Undo the bolts (while a friend holds the window) and lift the window out of the top and put it in a safe place. Next remove the three bolts that hiold the actuator to the door and slide the actuator out one of the existing bigger holes at the bottom of the door. The motor is held onto the actuator with three small bolts, so undo them and it is free.

If you get stuck send me a PM ;).