ek b18c swap

[aaron1828]

hey does any one know what drive shafts to use when putting a typer b18c into and 96 ek hatch? will the stock ones bolt up to the typer tranny?

any info will appreciated

thanks

[zco]

no. you need the driveshafts from the b18c or evn a b16a. pm barefootbonzai. he has a set if u need.

[SPEEDCORE]

Since we on the topic of driveshafts...... are all DOHC VTEC B series driveshafts the same?

# of splines, lengths etc?

[aaron1828]

will the b18c drive shafts mate up with the standard 4 stud hubs?

[|N|]

Since we on the topic of driveshafts...... are all DOHC VTEC B series driveshafts the same?

# of splines, lengths etc?


NO


will the b18c drive shafts mate up with the standard 4 stud hubs?


yes

[BlitZ]

Since we on the topic of driveshafts...... are all DOHC VTEC B series driveshafts the same?

# of splines, lengths etc?

someone correct me if im wrong

EG, DC and EK are the same

EF and others are different

[|N|]

someone correct me if im wrong

EG, DC and EK are the same

EF and others are different


yes... and i m speaking from experience.
well as far as i know anyway

[civic_mods]

is it jdm dc2r 98 spec drive shaft is a bit bigger? in tearms of 36mm vs 32mm

[SPEEDCORE]

someone correct me if im wrong

EG, DC and EK are the same

EF and others are different

Meh who cares about EF/DA.... :p

So the others are the same...... interesting. Vury nice! :)

[barefootbonzai]

Yep EG, DC and EK are all the same for B-Series engines bar the JDM 98 Spec ITR which uses a 36mm outer instead of the 32mm like the rest, as mentioned above.

[aaron1828]

also does any one know which brackets are required to get the stock power steering and aircon pumps from the gli ek going with the b18c motor?

[Benson]

You'll need the Ek4/9 B-series powersteering pump with the b-series bracket and the B series alternator braket with the b-series a/c pump to make it work.

[aaron1828]

i have read that the b series pumps don't mate up with the gli ps and ac lines, is that true?