tsx skunk2 mods

[blk05gli]

hey Aaron

any opinions on this:

sport compact car project TSX (http://www.sportcompactcarweb.com/projectcars/0505scc_project_acura_tsx_part_2/photo_09.html)

[aaronng]

What about that? Just a car with bolt ons and the custom k-pro harness for the k24a. Also, their tuning for the car doesn't seem complete since they only gained 8.2kW peak power, unlike Jtune which got at least 30kW.

BTW, their table says the M3 does the 400m in 15.1 seconds? That's not true. :)

[enkay]

they must b bad drivers ;) if thier m3 goes 15.1 thier tsx should at least b under 10 seconds! lol jokes

[aaronng]

Nothing really impressive about the Skunk2 car. The Hytech one is more interesting.

[EuroDude]

asif a stock 6MT TSX does a quarter mile in 15.9 sec lolz

[sodaz]

HAHA the numbers are pure BS! Yeah the Hytech system is more interesting than this.

[yfin]

You can see if you look closely that the format of the table went off - the Skun2TSX was a 15.1 over the 1/4 and the M3 was 13.6.

The lateral acceleration is interesting .92 for the Skunk2 TSX!

[enkay]

haha yer i just noticed that too now that u mention it hehe =D

[aaronng]

You can see if you look closely that the format of the table went off - the Skun2TSX was a 15.1 over the 1/4 and the M3 was 13.6.

The lateral acceleration is interesting .92 for the Skunk2 TSX!

Ahhh I see.

Just need coils, thicker swaybars and gripper tyres to get 0.92.

[ALN]

Nothing really impressive about the Skunk2 car. The Hytech one is more interesting.

It was the first stage of the skunk2 tsx mods. I got the magazine of the next part. Skunk2 produced 238 HP atw, 177 LB ft TQ N/A and the redline is 8200 .Stock bone 173 hp atw.

They did stage 1 cams combos with port polished head along with 68 mm TB. They used K pro but they did not mentioned about losing the dash features but I would guess they did lose it.