cv joint boot kits

[vinnY]

bought the outer ones from cab today, cost me $10/side

now my problem is i didn't get a look at the part number booklet, and now that i look at the box it says its made for;
honda accord/prelude 85-90
subaru liberty 4wd 89-on
boonma cv boot kit

brand is hiroko rubber, haven't been able to find a parts catalogue online

just wondering whether anyone is able to shed any light as to whether it'll fit my ek4 or not?

[xedent]

No idear mate, your best bet would be to take to your closest honda dealer and ask them if they would fit or even a mechanic !

[ECU-MAN]

i think they will fit.

[omgzilla]

Get yourself some vernier calipers (or even a length of string) and measure the 2 points where the CV boot is clipped onto on your vehicle (on the cv joint itself and on the drive-shaft). Then measure the new boot for size. The new boot should be the same (if not very slightly larger) in diameter.

Also, try to get some of the dirty old grease out of the joint (if the old boot split and debris got into the joint) before pumping in the new grease.

Have fun! ;)

[jdm_kid]

they gave me part no. PT-2097 (Inner) and PT-2096 (Outer), this was for a EG civic. i think he said there all the same. EK/EG etc etc.

[vinnY]

sweet should be right then, thanks for that
boots not busted yet, see cracks forming though so its time to go

[jdm_kid]

good to hear. just replace if b4 it splits lol other wise u will have to clean out all the grease inside your rims lol.