ABS light in DC5r cluster

[Typ3 R P!mp!n]

Hi guys,
i removed the cv joint on passenger side of the car, cleaned it up and added new grease and now the ABS light is always on. Need a lil help on what to do to fix problem....

[ECU-MAN]

you either havnt lined up the ABS pulser corectly or damaged the WSS.

IF you have changed the actual CV did you fit the pulser ring back on to the new joint ??

btw moved

[Typ3 R P!mp!n]

nope i didnt replace the cv joint... only repacked cv joint with new grease...
wat is tha WSS??

[ECU-MAN]

wss is wheel speed sensor

you may have damaged it when removing the shaft

measure its resistance with a milti meter




http://b16a2.kicks-ass.net/tech/em1-wss.JPG




- make sure the parts in the red arrows line up
- if you streched the wire the green arrow points to then you may have damaged the wss. follow the wire to the orange connector. unplug the connector and measure the resistance.

[Typ3 R P!mp!n]

Thanks ECU man, i will have a look

[ECU-MAN]

also make sure the bolts that hold down the WSS are tight