PDA

View Full Version : Roof Light


bby_dragon
03-10-2007, 02:17 PM
Hi, i have trouble prying open the roof light of my vti-s jazz. The manul says carefully pry it open with a nail filer or a flat head screw driver. Done both, the nail filer just seems to bend and the flat head screw driver puts dents in plastic housing. Actualyl everyhting i try ruins the plastic housing, is there a way to open it? i cant even open it seems so stuck and i dont want ruin the housing anymore.
EuroAccord13
03-10-2007, 02:50 PM
Wrap a piece of cloth over the flat head before you use it to pry it open...
bby_dragon
03-10-2007, 11:14 PM
flat head doesnt even see to fit into the gap, only the nail filer does, and that just bends. Its as if the lens is bolted down.....
hinezz
04-10-2007, 07:07 AM
Ceiling Light Test/Replacement

1.Turn the light switch OFF.
2.Carefully pry off the lens (A) with a small screwdriver.
Ceiling Light: 8 W

http://img162.imageshack.us/img162/7034/ceilingem3.jpg

3.Remove the two mounting screws.
4.Disconnect the 3P connector (B) from the housing (C).
Little Red Devil
04-10-2007, 11:16 AM
hope this pic helps:
http://i152.photobucket.com/albums/s191/phyllissoh/try7664.jpg