King Springs

[Diablo6298]

Hey, I have found some new king springs that are really cheap but I am not 100% sure that they will fit or would be suitable on my DC4.

They are KHFL-58ASL and KHRL-59SL, in the king spring catalogue it says for super low on a DC you should use KHFL-58A and KHRL-59. So can I automatically assume that they would not be suitable for my DC4?

Thanks!

[BluEG]

these springs are usually superlows for a EG civic,
but can be fitted to a DC integra but they will be
lower then superlows. Did this on a mates dc2 and on standard
rims they were tucking nicely under the guards :D pretty low though.

[Diablo6298]

I know they are for civics, that is why I asked =P

I have a set of blades on my car, so I need quite a bit of drop but I don’t want it to be excessive. The super lows lower about 5 to 6 centimetres which is what I want. If it was 7 centimetres or more then it would tuck under the guards and it would be too low as per the laws in Victoria.

PM sent BluEG