Gt Led Lights

[fjear]

Hi Guys


Search function wont let me look for GT LED LIGHTS. I'm pretty sure I saw someone with the GT style LED Brake LIGHTS is there a DIY for this or any info on how I can get this done for my euro?



Cheers

[EUR003act]

i changed my high mount brake light to 14LED bar... if thats what your talking about?

[fjear]

so does that mean your break lights are LEDS? I'm talking like the Holden GTS Led Brake Lights.. i think a member did this to their euro?

[EuroDude]

Do you mean the bulbs themselves or the plastic housings?

If you simply want LED bulb replacements, you can get then off eBay and http://www.superbrightleds.com.

You need ones that shine light out the front AND sides due to the reflective nature of the euro's light housings. If they only shine out the front, they will be too dim.

And make sure you get the RED LED ones since the housing plastic is red. White LED bulbs give out very little Red light, and will look very dim.

7440 and 7443 can be found here
http://search.ebay.com.au/search/search.dll?from=R40&_trksid=m37&satitle=LED+7440&category0=
15-LED 7440 and 7443 at http://www.superbrightleds.com/tail-brake-turn.html

Suitable Wedge bulbs can be found here
WLED-x5 at http://www.superbrightleds.com/mini-wedge.html
eBay also sell some suitable multi-LED ones that have side LEDs.


The top center bulb is a 7440 (Single brightness)
The two outer bulbs are 7443 (Dual brightness)
The two inner bulbs are just your usual wedge 194 or 168 bulbs (same as the parkers)


Find bulbs that use the High Powered Luxeon LED's if you can, they are very bright. One Luxeon LED is about the brightness of maybe 8 normal LED's.

[EUR003act]

so does that mean your break lights are LEDS? I'm talking like the Holden GTS Led Brake Lights.. i think a member did this to their euro?

my centre mount brake light is LED... its a bar of 14 10mm high intensity red LEDs...

i think your talking about both the tail and brake lights on the rear bar and boot. yes i remeber a thread about that, you have to go custom, its not just a bulb swap over, it envolves alot of work, im currently doing it to my lights (i have a spare left tail light)

[badthing]

You mean like these?

http://i16.photobucket.com/albums/b21/canibus9009/DSC00268.jpg
http://i16.photobucket.com/albums/b21/canibus9009/DSC00248.jpg

btw, old thread is here. (http://www.ozhonda.com/forum/showthread.php?t=40806)

[EUR003act]

Ok guys, this is very very important! now that ive mastered the whole baking your lights in the oven thing, im looking into making custom tail lights (again!) lol

but cant decide what design to go for... i want them to look really agressive and scare people when they see my car at night lol

so please be honest, and tell me which design you like best :) cheers!

OPTION #1
http://i239.photobucket.com/albums/ff128/eur003/option-1.jpg

OPTION #2
http://i239.photobucket.com/albums/ff128/eur003/Option-2.jpg

OPTION #3
http://i239.photobucket.com/albums/ff128/eur003/option-3.jpg

OPTION #4
http://i239.photobucket.com/albums/ff128/eur003/option-4.jpg

*note obviously these are just quick photochops to get the idea, the real thing will look alot better :p

[longers]

i vote option TWO.
cannot wait to see your final product

[aday]

I'd definitely steer clear of options 1 and 4... might look a bit naff in the flesh. 3 might work, but I'd play it safe and go with 2. :)

[10KRPM]

id vote 2

[TODA AU]

My choice would be 2…
( Bare in mind, I have no fashion sense what so ever)

[EUR003act]

so this kinda thing?

http://i239.photobucket.com/albums/ff128/eur003/possibility-MediumLarge.jpg

[longers]

yes that kinda thing!
maybe make a ring around the idicator too?
so the ring flashes when you indicate :eek:

[Suntzu]

I like 2

[Euro08Jaz]

i agree :thumbsup:

[geeang]

Option 4!!

[Darkii_]

Option 2! Win

[EUR003act]

lol option 2 is looking like the winner here! lol

i did some investigating with one of my spare tail lights... its nearly impossible to remove the lens cleanly (the plastic is physically melted to the reflector) :( so ill have to drill the LEDs in from the rear... using a drill press i can do it without slipping past and into the lens, but im worried about the plastic spalling falling into the housing and me not being able to get it out...

positioning is also going to need careful planning, obviously i wanna get them spaced evenly, but i have to avoid the plastic bracing and mounting points on the rear of the light aswell...

ill try make a prototype this week if i have time :P

[xiang]

option four

[koray]

option two

[Kev85]

i really like option 2

let us know how you go.

would love to do the same.

[Miz_II_Die_IV]

Can you do mine.. Option 2... hehehe... Group buy anyone.. hahaha....

[EuroDude]

option 3 looks awesomo

[akina]

i dunno but stock already does it for me lol

but if i had to pick... option 2 :)
do the holden R8 style!

[Crapdaz]

yeh if i had to choose i would choose option 2,
but from the photos it does look a bit tacky no offense.

keep up the good work man,

[tony1234]

i dunno but stock already does it for me lol

but if i had to pick... option 2 :)
do the holden R8 style!
Yeah,i agree stock for me too.

[luv_psi]

I think option 3, just for something different.

[EUR003act]

aggghhhh... tail lights will have to be put on hold... one of the LEDs in my centre console has started having epileptic fits :( damit! stupid bloody diodes!