Mtf

[Kiki]

Im wanting to change my MTF over but it will take me a fairly long time using a Tom.thumb to pump it in from the normal point (Car-Dc2r)

Im pretty sure u can do it from the Oxy sensor(or whetever its called) i know the location!!
Fill it with a funnel.......

just would like to confirm that or if theres another/easier way???

Cheers

[bennjamin]

simple. Drain as per usual , and park the car on a flat level surface.
Open the 17mm fill bolt on the side of the gearbox , then take off the VSS (ontop of the gearbox)
Use a funnel + piping to fit inside and simply pour the new stuff in until you see the excess fluid come out of the fill hole. This is exactly the lvel you need. Once the fluid has stopped leaking out tighten 17mm and the VSS and you are done.

[aaronng]

You don't fill it through the oxy sensor (which is plugged into your header)

[Kiki]

Awsome thankyou