gearknob

[Joel The Mole]

i need a spacer or something for my new gear knob, the thread hole is larger than the gearstick. is there anything that i can use to close the gap??
http://i176.photobucket.com/albums/w194/JTM666/Image009.jpg
the white bit is too big, need something to fill it.

cheers

[JasonGilholme]

usually they come with another insert.

i've used hard plastic hosing before in order to make a new thread.

[LIV3]

you might be able to get the universal inserts for this.

[jasonb]

if your handy with tools ,what i do is fill the hole with 5 minute araldite and then redrill and tap the hole with the same thread as your stick has

[EKVTIR-T]

Just get an original honda knob and cut it apart and take the threaded insert and glue it into the new knob.
Ive done this a few times,works great.

[aaronng]

It usually comes with the insert. Unless you bought an auto gearknob.

[Joel The Mole]

bought it off a friend, who has a corolla, hence why it doesnt have any spacers or anything liek that.

might just glue it to the stick with some silicone or epoxy or something

[est1989]

i dont think that will hold very well...
try the universal inserts