what size rims will fit EK VTIR?

[alphabeatsco]

just wanna ask what offsets are EK VTiR...
what would look goodon EK? 15 or 16s?
i mean peroformance wise...

also what size are the lug nuts to be used? im a newbie...answers would be appreciated..thanks

[skoota]

They're 4x100's mate. Stockies on your VTi-R are 15". So do you like them or feel you need bigger ones? 16"s are the biggest I would go. I have 17's and thinky they're too big.

[toE]

dont quote me but i believe the civic's (EK) offset is +35/+38.
Have u done a search?

and go for 16s!

[[[d a n n y]]]

15" mate...all the way.. :D

[VTi-RT]

16's look better.

Best size if your looking for something between all out performance and looks.

[VTEChnique]

16's look better.

Best size if your looking for something between all out performance and looks.

My thoughts exactly, but not that many ddecent rims in 16".. only 15" for lightweight track use (intended use) or 17" bling-blings..

another problem is due to the above, tyres for $16" rims are often more expensive than for egsample 18" rims thanks to the market not really supporting 16" rims..

[Civic Type R]

I have 16" on mine.
stock was 195 55 15. now im running 205 45 16.
rubber is about the same cost - $175 each tyre.

17's look nice but decreases performance. I have seen 14" rims on a VTiR before, the poor guy thought they were normally 14s .. err.. no.

[D16A8]

power to the ground better - 15 inch

nice all rounder - 16 inch

look tough for the ppls - 17 inch

bling bling factor while ridin' them 18's yo - priceless.

^_^

16's I reckon.

[alphabeatsco]

i will get 16s...but what size tyre and rim should i go? to make sure it's not rubbing against the guards?
thanks :)

[Civic Type R]

same as me.

[Alpine]

Would 16" look OK with stock ride height (ie not lowered)?

[Civic Type R]

YES!

[Alpine]

YES!

You run 16" with stock ride height? Do you have a pic of your car online I could see, please?

[Civic Type R]

my car is lowered.

http://home.iprimus.com.au/poons/Integrated/ctrmc.jpg

[VTi-RT]

16x7 rims are fine, even with lowering - not to the ground of course :roll:

i'm running 205/55R16 Azenis with a 2" drop, no rubbing at all.

[EK4]

Save your $ and just powder coat the stockies :D

[alphabeatsco]

16x7 is good?
right???

so anyone selling this spec rims ??

[raff]

yeh 16"x7 i got there perfect mad size.....tyres arent that dear either i got 205/45 and not much at all!!

16s are a nice in between for looks and performance....

go the 16s 4 sure with 205/45s no rubbing at all if u got a reasonable ride height and they look spot on :)

[|N|]

yea.. 16s are the best for EK... increase handling without loosin too much tourque... of coz... light weight wheels would be the best option...

[luzinit]

i got 16x7, tyres are 205/45/16, the offset is +43..
cars lowered 2" back and 2.4" at the front.. which leaves zero finger gap at the front tyre, i get rubbing every now and then when taking a hard corner n hitting a bump in the road, but other than that, its all good! if ur not lowering more than 2", u will have no problems

[onabuzz]

hahah asif uld go anyhing smaller hten 18".. im rolling on 18" chromes and would love to go to 19"s.. any thing smaller jus looks.. umm shit..

[Z]

I thought id semi-hijack this thread instead of creating a new one.

What offsets would fit an EK without too much trouble? Anywhere from 36 -> 44 ???

-Z

[rly1]

hahah asif uld go anyhing smaller hten 18".. im rolling on 18" chromes and would love to go to 19"s.. any thing smaller jus looks.. umm shit..

18"?????? and chrome????? that is worst than shit to me !! no offense
everyone's got their own taste, so better keep ur shitty comments for urself mate