Indicators not working plz help!

[riceburner]

hey guys

i realised none of my indicators flash around the whole car and no clicking noise and no signals on the dash work either, my hazards also dont work, i notice this after i jump started another car, i also had a bit of a flat battery but the car starts fine now but still have the indicator problem. any help would be great, kind of dangerous driving with no indicators lol, btw car is a 96 VTIR Integra.
cheers,

[Q_ball]

Check the fuse!

[ECU-MAN]

make sure the hazard ligt switch is connected properly, also check the fuse.

[Phuong1987]

Yeh check ur fuse.
I wouldnt drive the car around man , might get into a accident

[jimidy]

yea like others said check fuse box under the dash think its the fuse all the way to the left if it is burned out in the middle ( you will notice it ) then thats your problem, if they all seem to be in tact you could be short circuting, check the wires in boot etc are not touching one another,
i would say it would just be the fuse , hope it is

[Cr@ckerJ@ck]

if it's not a fuse it will be the relay.

[ECU-MAN]

if it's not a fuse it will be the relay.


could be

[riceburner]

thanks for all the help guys it was the turn fuse!
please close tread