Apexi Power FC for an EK4

[Limbo]

Hi guys, just wondering if any of you guys out there with ek4s are running the APFC?

Can you comment on how good it is? does it still retain all the normal driving features?

Also can someone tell me what is the model number for the PFC for an ek4?

[DreadAngel]

I can't find a Power FC for the B16A (I only see the part # for B16B and B18C), the AP Engineering special version of the Power FC is discontinued for the B16A in the EG6/EG9 not sure if there is any difference there...

AP Engineering Power FC for B16A - 4E14H01Y

[Limbo]

woooo, can i use either the b16b or b18c ITR ones?

[SPEEDCORE]

I'm running the B16B...

[Limbo]

so which one would run a b16a? Which is obd2 (i think)

APEXi Part # 414AH003(CTR) or # 414AH004(ITR)????

[SLOWEGG]

Both will, as long as the OBD is the same.

[JasonGilholme]

Both will, as long as the OBD is the same.

I'm guessing the only difference would be the base tune that comes on the ecu?? It'd probably still run a B16a though but might not be ideal.

Wouldn't matter though because you wouldn't drive the car for too long before you got it tuned.

[Limbo]

err. i think you guys missed my point. Which one would be the same Obd as an ek4? the ITR or the CTR?
I'm sure if they don't have one for the ek4 the base tune will be different anyway

[misteR_bilzz]

woooo, can i use either the b16b or b18c ITR ones?


Both will, as long as the OBD is the same.

theres the answer.

[Limbo]

err that's what i'd like to know, which one is the same obd.......

[SPEEDCORE]

Well I can confirm B16B one is OBD2.

Given that the ITR was a 96+ produced vehicle, one could safely assume that it is OBD2 also.

[locote]

Yes obd2...
I had to get a convertion harness to use ITR PFC on my B18c

[bennjamin]

guys both CTR and ITR are OBD2.
CTR = OBD2B
ITR = OBD2A

[Limbo]

ok now we are getting somewhere. Ben now which obd2 is the ek4 then?

[Limbo]

ok just found out, ben your incorrect both the CTR & ITR are OBD2a
Same as the EK4.

Thanks to Toda AU