1993 CRX wheel bearing/the back one!

[kzilla]

Hi guys,

Took my sister's 1993 CRX for a wheel aligment, just to also find out that it'd need new WHEEL BEARING and the guy believed that its the rear one.

He also directed me that there are two type of rear wheel bearing for the CRXs, ofcourse the cheap one and the expensive one. He explained to me the differences but i just couldn't register it on my mind so i thought i'd ask for your help here.

Which type of bearing is it for the back wheels of a 1993 CRX?
Can i get it from Honda and what part number would that be so i dont' need to talk too much on the phone :)?
Also what type of low beam and high beam is it? Its pretty bad vision and i want to upgrade them for her.
How do i adjust the angles?
Does Repco has a owner service manual?

Thank alot guys, i've look for the SEARCH function but i dont see it.

KHOA

[Int3gra-T]

Its the one between New Post and Quicklinks
its been highlighted yellow.

[kzilla]

Thanks mate, found it :).

I rang up RobertLane Honda in Vic and part number is #42200SR3A53.
Cost $326.70+gst, damn that's way too much, any recommended wreckers around Vic guys?
I'm sure there is a cheaper alternative way.
Thanks

[ECU-MAN]

dont put a 2nd had bearing in your car.

the new bearing comes with the Hub,

if you want to get away with a cheeper one, remove your rear hub and press off the bearing from it. Go to a bearing shop and buy the bearing on its own.

[kzilla]

Thanks guys, much appriciate your inputs.

[dsp26]

you can get generic ones... i've paid ~$350 inc install a while ago