92 Civic Rear Bumper Replacement

[b4dnuf]

Ok Long story short i need to get a new rear bumper and replace it for a friends car.
The car is a 92 Civic Gli Sedan

My question is How hard or difficult is it to remove the bumper and replace it with a new one.?

I';ve tried looking for a DIY but the one there is for a DC5R

[Kiz_EG6]

Hey man, i pulled mine off a few weeks ago...

From memory, you open the bottom hatch and there's about 5 screws there, flat on the top of the bar (you will have to have someone holding the hatch about 3/4's of the way down to get at them easily)
Then there's two under the wheel arches, which you may have to jack the car up for, then maybe two or so underneath the car you will see fairly easily!!
You should only need a fairly long, medium sized phillips head screwdriver, and a 10mm spanner/ratchet!

From memory that was it, then the cover should slide off, just don't pull up, or you could damage tailights, slide straight out :)