skunk2 camshaft??

[mikoZ]

how s abt skunk2 camshaft?
any one can recommend some?
which stage is better(the got 3 stage)

[T-onedc2]

You need to specify what engine (I assume DC5R K20) and intended use otherwise thread will get no replies.

[EG5]

Pro2 cams skunk2 for K series is good for stock bottom end K20A
easy 145 - 150kw@wheel if its tuned right + I/H/E
We did Pro 2 SKUNK2 cams for our customer DC5R already

Buddyclub N+ cams on DC5R are proven 148kw@wheel , 13.4 sec 1/4 mile on Natalie's (MISS R ) DC5R using DOT street tyres.

*Both running stock bottom end*

[jooboo]

Get Toda Cam's --- Skunk2 & buddy club cams = rubbish
Trust me you won’t regret it.

[zco]

on what basis are you dissing these skunk2/BC cams ? dynoprove and also track/drag proven times have come from these drivetrain setups..

ive seen alot more cars use these cams and run the times here in australia than any that run toda cams

toda cams are great aswell. but dont go dissing other brands

[mikoZ]

that z in right way~



toda cams are great aswell. but dont go dissing other brands

[mikoZ]

eah, my fault...

You need to specify what engine (I assume DC5R K20) and intended use otherwise thread will get no replies.

[dyljoy]

Pro2 cams skunk2 for K series is good for stock bottom end K20A
easy 145 - 150kw@wheel if its tuned right + I/H/E
We did Pro 2 SKUNK2 cams for our customer DC5R already

Buddyclub N+ cams on DC5R are proven 148kw@wheel , 13.4 sec 1/4 mile on Natalie's (MISS R ) DC5R using DOT street tyres.

*Both running stock bottom end*




I try to sit on Miss R DC5R b4 in brisz, feel like mad, great tuned and unforgetable outlooking of the car! nice is all i can say!:thumbsup:

[mikoZ]

must change the engine spring if using skunk2 pro2 highcam?
how z abt cam gear? i just heard for k20a, its not really necessary..is that right?

Pro2 cams skunk2 for K series is good for stock bottom end K20A
easy 145 - 150kw@wheel if its tuned right + I/H/E
We did Pro 2 SKUNK2 cams for our customer DC5R already

Buddyclub N+ cams on DC5R are proven 148kw@wheel , 13.4 sec 1/4 mile on Natalie's (MISS R ) DC5R using DOT street tyres.

*Both running stock bottom end*

[skunk2tony]

Skunk2 Pro cams I would recommend using at least an Exhaust cam gear. and retard it at least 3-4 marks on the exhaust side.