ep3 kw at wheels

[SuperSteve]

anyone know what a stock jdm ep3 type r how much kw at the wheels it would have ??

[michael_antoi]

id say around 120kw like a jdm dc5r

[2002 TeGgY]

wouldnt jdm dc5r have a bit more than 120KW

[Nepolian]

Y dont some 1 just put one on the dyno??

I havent cos its not stock. Would like to know??

[Tu88y]

do you know anyone with a EP3 in Sydney or in Australia. I know there is a few lurking around.

Best to check Honda-Tech or some Honda forum in the UK as they were available over there. I know of one in Sydney that's still awaiting to get compliance plate

[Nepolian]

Ther is at least four or five that I know of in Syd!

[Philip Lee]

no point checking UK forum cos their cars have lower output than JDM EP3 just like FD2R vs FN2R.

from spec, JDM DC5R has slightly more kw.

[Mattski_VTIR]

I think 120 is prob a good figure, as DC5S put down between 110, 115kw depending on Dyno = 154kw at the engine..

[SuperSteve]

well JDM ep3's are rated 158 at the flywheel so im guessing should b around 120kw. thats awesome for a stock car hehe ill dyno my ep3 coz its still stock and ill start moding and see from there :) when i do get a dyno ill post up but it would b for a couple of weeks

[kn1ghtm4r3]

sweet cant wait to see what it puts out =)

any mods to the exterior yet?

[Mattski_VTIR]

Any plans for Performance/Suspension Mods? I believe alot of the DC5 parts are interchangeable?? (i have a JDM EP3 SwayBar on my DC5)

[SuperSteve]

na exterior gonna stay stock for awhile i think they stock type r body kit looks nice hehehe its not to over the top hehe.
preformance mods wise im thinking of upgrading to cold intake but scared if cops pull me over and defect me for that and also later on down the track gonna get a good exhaust system installed just need money for that haha

[Mattski_VTIR]

You should look into the Gruppe-M, its very Popular on the EP3s in the UK! Very Similar design to that of the DC5 (and its an inclosed intake system) With some simple mods (i/h/e / kpro) You will have a little weapon on your hands! :thumbsup: I like the look of them in standard Trim too :thumbsup:

[Tofu]

I got 123kw atw from a stock DC5 TypeS, but i know it depends on which dyno it is.

[Nepolian]

Modded, with about 140 - 150 ATW would be awsome in a EP3.!