itsdamo
16-11-2007, 08:45 AM
Can anyone tell me what the thread size are on a Garrett T25 for the oil in / out.
I am going through the process of redoing the oil drain arrangement that was previously very poor.
The fill and drains holes / threads look like the same size.
I have the banjo fitting to -4 for the oil in but I need to redo the drain from the turbo and into the sump.
Thanks,
Damian
I am going through the process of redoing the oil drain arrangement that was previously very poor.
The fill and drains holes / threads look like the same size.
I have the banjo fitting to -4 for the oil in but I need to redo the drain from the turbo and into the sump.
Thanks,
Damian