Eg civic, Spoon 4 Pots & Rotor size ?

[Sexc86]

Hey guys

Looking at getting some spoon 4 pot calipers up front, as they are only release for Dc2r (correct if wrong), these will only suit 280mm Rotors (is that the exact size). Firstly does anyone know if anyone makes slotted / vented 280mm Rotors with a 4x100 stud pattern? eg Dba? also will my EG6 CCX pads on my standard EG6 (260mm) Setup be suitable for this? or will i need a new set?

Thats about it guys, thanks in advance



Regards Lyle

[90LAN]

lyle they make a spoon brake kit for the ek4 with 4x100 brake setup so that would be the one to get mate !

[Sexc86]

they dont man :( it says ek4,eg6 blahblah... but says needs larger rotors

[02gzm]

check out DBA's website or even give them a call. im sure they'd be able to help you out some way or another

[EG CIVIC]

Jdmyard's EGk20a brake setup :thumbsup:

I think the disc is Project Mu.

http://img250.imageshack.us/img250/4782/egk003wx8.th.jpg

[Sexc86]

spoke to dba they dont have 282mm rotors with a 4x100 stud pattern... not even blanks

now can i use gen 4 prelude brake rotors with the 4x100 civic hubs? is this even possibly? are the gen 4 vtir rotors 282 mm? would this be possibly with the spoon 4 pots?

lyle

[EG CIVIC]

Check this thread as it may be of some help.

http://www.ozhonda.com/forum/showthread.php?p=1417771#post1417771

e240 is using some Taiwanese branded Exzess 4x100 pre-drilled 282mm sized rotors.

[nd55]

> now can i use gen 4 prelude brake rotors with the 4x100 civic hubs?
> is this even possibly? are the gen 4 vtir rotors 282 mm? would this be possibly > with the spoon 4 pots?

Speak to Yonas at JDMYard.

He helped me with my EK 282mm brake conversion and is very knowledgable.

1996 ITR rotors are 4x114mm. Require drilling, but the stud pcd makes it easy to locate somewhere to drill the new 4x100mm pcd.

Nick.