View Full Version : DIY springs on civic 2006 FD
Frost_FD
21-11-2007, 03:40 PM
Hey guys,
Has anyone acutually fitted springs on their FD them selves?
If yes can you please post some instructions so i can install them next week.
Thanks
FrosT
Aco3n
21-11-2007, 07:48 PM
better with the workshop.. I tried to did mine by myself.. ending up unable to dismantle fr shock top cover.. need a compressor to take it off.. and shockies have ball bearings..
Frost_FD
22-11-2007, 12:18 AM
Thanks Aco3n,
Shop it is then, since i have to get it aligned b4 i take it on the road.
id advise the same, i did my coilovers with a friend at home and doing one corner we popped the ball bearings out and spent an hour finding all of them, accidently dismantled the cv and had to get it re built and re booted lol
however if you have the tools and can be bothered, go for it :P good learning experience
btw hi to another perth fd member
Frost_FD
22-11-2007, 12:48 PM
Hi rhk,
Where abouts in perth and what have u done to ur FD? and do you know any cheap but good places for springs installed..
uangel
05-10-2008, 05:12 PM
never diy those hard jobs
rk 86 wa
06-10-2008, 06:57 PM
^ it isnt hard, and diy is a good way to learn
bennjamin
06-10-2008, 07:00 PM
^ it isnt hard, and diy is a good way to learn
....not on a car with macpherson front struts. You cna stuff up in many many ways....can end up costing alot and hurt you bad. Best to leave it to the pro's.
You CAN get away with some other cars , such as EUROs' or EG/EK/DCs - they have alittle easier suspesion to work with
bodaas
06-10-2008, 07:06 PM
to me, the front it took me 2 hours, dissamble both right and left shocks, spring, everything
the rear is the hardest job, it took me couple hours
from almost 9 o'clock night include break,
just to get one spring out
yeah it isnt easy for diy, unless if you have basic mechanical knowledge and tools
rk 86 wa
06-10-2008, 11:17 PM
i didnt say it was easy haha
i just meant that it wasnt impossible to do :P
i was gonna get a workshop to install the springs, but then they were charging like 150-200$ for the install, so i thought to myself, stuff it, i rather install it myself and save the money, if i wanted to spend more money i might as well have gotten a pair of coils from the start. well newho ... diy spring install is a good way to kill an afternoon :P and it was a good learning experience!
http://www.8thcivic.com/forums/suspension/5050-step-step-lowering-si-06-a.html
denot
07-10-2008, 12:18 PM
^^^
rk_86_wa: Well "HARD" doesnt means impossible either... :p
stig: Hopefuly you install them correctly otherwise who knows howmany coils can be bought by the money you spend to fix the car later :p
Frost_FD
08-10-2008, 11:33 AM
This is a revive of an old thread, i got my springs done almost a year ago and for 200 dollars its not bad and plus you cant really do a wheel alignment at home.
Will switch to coils next! i want to go lower =P
stig: Hopefuly you install them correctly otherwise who knows howmany coils can be bought by the money you spend to fix the car later :p
rear suspension fall off ?? ...lol
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.