eg wing

[rayb3na_]

how do we take the stock eg wing off? :S

[bennjamin]

Here is a ROUGH idea.

You need

1 x 10 socket + ratchet AND OR 10mm spanner
1 x phillips head screwdriver
1 x pliers
2 x small hands

Open your hatch all the way UP
GRab your 10mm socket/ratchet OR spanner and locate the 4 x 10mm nuts (black) located on the HINGE
Remove these , the wing will come loose so be careful of the hatch position.
Pull off the rear wiper water pipe (pulls off easy)
Lower the hatch about 20 deg. or so (about halfway up) and the wing should be ready to move , pull up slowly and you will notice the wiring loom for the rear brake light. It will lead to the white CLIP that is held onto the metal part via a small lip , undo this ( hard for big hands) and then unclip the clip.
Pull the wing off easy as.

[Paul1985]

Here is a ROUGH idea.

You need

1 x 10 socket + ratchet AND OR 10mm spanner
1 x phillips head screwdriver
1 x pliers
2 x small hands

Open your hatch all the way UP
GRab your 10mm socket/ratchet OR spanner and locate the 4 x 10mm nuts (black) located on the HINGE
Remove these , the wing will come loose so be careful of the hatch position.
Pull off the rear wiper water pipe (pulls off easy)
Lower the hatch about 20 deg. or so (about halfway up) and the wing should be ready to move , pull up slowly and you will notice the wiring loom for the rear brake light. It will lead to the white CLIP that is held onto the metal part via a small lip , undo this ( hard for big hands) and then unclip the clip.
Pull the wing off easy as.

Spot on :thumbsup: