How to Install Angel Eyes Setup?

[Honda_Pda]

Hey guys,

I have a pair of angel eyes headlights..

Not sure on how to install them considering i received a extra set of looms.. Not sure what they are for.. Could anyone help me with the installation? The pictures are attached..

http://img148.imageshack.us/img148/7048/dsc00533kx9.th.jpg (http://img148.imageshack.us/my.php?image=dsc00533kx9.jpg)

http://img266.imageshack.us/img266/4041/dsc00535qe1.th.jpg (http://img266.imageshack.us/my.php?image=dsc00535qe1.jpg)

http://img406.imageshack.us/img406/8223/dsc00537hx3.th.jpg (http://img406.imageshack.us/my.php?image=dsc00537hx3.jpg)

Thanks

[destrukshn]

too bad i can't see it, i'm at work.
lol.
i've done quite a few, and they're not that bad

[Honda_Pda]

pictures are bigger now..

[Kiz_EG6]

The looms will convert your single H4 globe setup to a dual H1 setup.

All you have to do is plug the single H4 end into your existing loom and the two splits into the back of the new headlight.
P.S keep these out of the way of ur belts (i learned the hard way :()

The lights themselves should just slide in and bolt up where the OE ones did.
Just keep in mind, being aftermarket, depending on the quality of the brand you bought, they may take some mucking around to flush up properly

Good luck!!

[Honda_Pda]

thanks for that.. But what will converting it to a dual h1 setup do?

I am unsure of what to do with the 2 red and white wires? I assume these are for the halo rings, but where do i connect them to?

Regards

[Kiz_EG6]

Yeah, sorry at a closer inspection, i really cannot tell from the pics!!

It doesn't look as clear and simple as mine were!

Did it come with a wiring diagram or not?

BTW, the advantage of having the H1 conversion is that H4's cover high and low beam, where as a H1 has seperate globes for high and low.
This is done because you now have seperate places in your headlight for the two!
Eg:


hi/lo hi/lo
Original headlights ( 0 ) ( 0 )

hi lo hi lo
Projector/angel eyes ( 0 0 ) ( 0 0 )

[Honda_Pda]

yeahs.. i think i can only find one of the converters, or is that the 2?

I'm trying to find out where to connect the 2 positive and negative wires nows.

Should be fine after that..

[destrukshn]

to your battery.

[Honda_Pda]

to my battery? Isnt the 4 wires that are connected to the headlights connected to the parkers? I am not 100% of this but asked another member just then..

I don't think i will be connecting the dual h1 converter as i am not sure of even how to do this and if i even need 2.

I'll give it a try and see if it will work..