RSX parts same as Integra DC5?

[Dan Dan]

Sorry if this is a noob question... but are all RSX parts interchangeable with our DC5 type R?

I'm flying to the states and trying to sus out whatever parts i can bring back - intake / throttle body / fog lights / flywheel or whatever else people would suggest from the "bang for buck mods..."

Low budget – never going to get an ECU
#1 – Lightweight flywheel
#2 – Heavy-duty clutch
#3 – Lower final drive
#4 – Intake - CAI's deliver superior results.(Eg: INJEN / AEM / GruppeM)
#5 – Header + S2000 cat + cat-back system (60mm minimum)
#6 – Spec A2 camshafts / valve springs / head gasket 0.3mm
Power output: 126 ~128kw @ wheels (Dyno dynamics- shootout)
NB: Add K100 ECU for 144~146kw
http://www.ozhonda.com/forum/showthread.php?t=12532

[dc4t]

well im sure the intake, headers, camshafts/springs/head gasket will fit. hope that helps a lil..

[MSHONDA]

I fiitted rsx foglights (purchased the kit off ebay from the states) to my DC5 (non type R)and they fit no prob. Had to modify the holes in the bar to make them fit but all the wiring that came with the kit plugged straight in.

[XP02ED]

most items are the same..

they dont fit %100 though.. they aint flush for exterior parts but they fit

[tinkz1]

I believe our Type R is called a Type S in the states. So make everything should bolt on as normal

[Dan Dan]

sweet... thanks... i guess i just need to figure out which parts i can physically fit in the luggage... i got 2 X 23kg limit for luggage so should be room for plenty...

atm... i've only got brake pads, intake and fog lights lined up... anything i should put down on my list to pick up from the states?

[XP02ED]

super charger kit ;D

[Dan Dan]

super charger kit ;D

oh man... i wouldnt say it didnt cross my mind! HAHA... gotta hold off...

is an ECU something that would be cheaper to get from the states? or one of those pre-flashed hondata or whatever it was?

might be rice for some... but other thing i wanted was to rebadge the car to Acura rsx if it fit...