View Full Version : h23 dyno readout
fusionprelude
04-12-2007, 09:52 PM
hey guys i got my h23 lude dynoed it puts out 73.1 kws atw on a dyno dynamics dyno at TM autosports its this bout right or low power
Hooman
04-12-2007, 10:08 PM
about right, it is auto or manual?
willyumx
05-12-2007, 05:48 PM
is ur prelude stock as rock ? orr ? my mate has a 4th gen si manual with a CAI and full exhaust and did i think it was 85 or 90kws atw
fusionprelude
05-12-2007, 09:53 PM
stock as you can get.... its needing new piston rings or sumtin coz i blows puffs of white smoke at high rpm
btw its manual si h23a1 no mods except a cannon.... peak power was 73.1 kws atw at 146.2 kph at 5430 rpm
94vtirozguy
06-12-2007, 08:21 AM
white smoke could indicate head gasket issues, and possible warped head issues if you don't get it looked at soon.
fusionprelude
06-12-2007, 05:03 PM
its gooin 2 get all that done soon
Mitchman
20-12-2007, 05:48 PM
white smoke should be your rings going bye bye. not sure how much it would cost you to get a new oem set but im thinking more than it is for a H22 conversion :-p
fusionprelude
05-01-2008, 08:12 PM
im gettin the jdm h22 that 90lan has for sale
ekhybrid
05-01-2008, 08:32 PM
stock as you can get....
btw its manual si h23a1 no mods except a cannon
wake up
fusionprelude
05-01-2008, 08:43 PM
wake up
wat????
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.