B18C / EG Wiring Loom..

[zero33]

Need some help...

Has anyone used a EG VTi Ecu harness on a B18C ecu?

Will it work and are the pinouts the same? Or what mods need to be done?

[Samo]

which b18c??

type-r and vtir/sir's has diff ecu's


im using obd1 p72 ecu from early dc2's in my vti

[[[d a n n y]]]

yes deepends on ECU
type R on VTIR?

[zero33]

I've got an EG '95 vti, which i belive its got an OBD1 plug connector (Correct me if im wrong).
The B18c ecu is a DC2 -'97 - OBD2a ?

What are *all my options on connecting the EG harness to the DC2 ecu?
Has anyone attempted and completed an inexpensive way such as Pin -by -Pin with ghetto seperators?

[ECU-MAN]

VTi loom will work but you have to add extra wires, same as Si and GLi

[[[d a n n y]]]

u need a adaptor..
i dont think u need extra wires for vti.
si and gli u do

[zero33]

Should work as in should fit?.. Im refering to the ecu wiring plug's

how much are adaptors for the ecu?

[jdmTYPE R]

];1471436']u need a adaptor..
i dont think u need extra wires for vti.
si and gli u do
yeh u still need to add extra wires....and it depends on wat ecu u have if u got a obd1 ecu u wont need a conversion harness or if u got a obd2 ecu u will need the harness,pm ECUMAN if u need a harness..