View Full Version : B18c into EG5 VTi
p-rex
16-12-2007, 12:12 PM
hey guys quick question,
Can we use the standard EG rear engine mount to mount the b18c or do we need a b18c mount?
also can we fit the rear engine mount after dropping in the motor?
thx
[[d a n n y]]
16-12-2007, 02:21 PM
rear mount should be the same
fatboyz39
16-12-2007, 05:12 PM
They all should line up. As for changing engine mount when motor is in can do but alot more fiddling around.
connorling
17-12-2007, 03:28 PM
is the same mount for EG and DC
p-rex
17-12-2007, 04:24 PM
Im refering to the "Bracket" thats bolts onto the gearbox to the mount on the cross member
simonnowis
17-12-2007, 04:32 PM
b18c is pretty much drop into eg, they both have pretty much same chasis.
Benson
17-12-2007, 05:27 PM
You need the b18c dc2 or dc2r rear engine mount bracket.
EG's are different cause they have d-series engines
egads
18-12-2007, 06:04 AM
You need the b18c dc2 or dc2r rear engine mount bracket.
EG's are different cause they have d-series engines
yep just use all the b18c ones
see ECU-MAN 's diy for any more info
http://www.ozhonda.com/forum/showthread.php?t=30312
u need the integra bracket. dont get a Del-Sol one as it's different.. if you have a B18C or integra gearbox, u need the DC2 bracket.
changing that bracket with the engine IN the car is a major pain in the ass but it is possible if u jack up the engine itself etc.. is tricky but YES it's possible.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.