B20/VTEC V3 new backyard setup

[fatboyz39]

A few weeks ago we decided to build another B20/Vtec. Working with Dynodave we have built another simple combo.

Here is whats done:

Bottomend

84mm RS Machine Pistons
STD rods notched for ITR/GSR bearings
ARP Rod bolts
ACL Race (http://www.honda-tech.com/zerothread?id=1555476&page=19#) bearings
Micropolished Crank
Block line honed with ITR/GSR main cap girdle
ITR pickup and sump
OEM seals & gaskets
PR3 Cyl Head
Ported by Dynodave
Full Supertech valve train (http://www.honda-tech.com/zerothread?id=1555476&page=19#) inc flat faced valves
Rocket Motorsports Valve Job
Rocket M22X Cams
CROME Tunable ECU *base tuned*

Intake
Skunk 2 manifold *ported out to 68mm, ported runner by dynodave*
68mm Throttle body
15' Intake with blox 6' air filter/velocity stack

Exhaust
4-2-1 Toda racing headers
2.5' straight thru exhaust

Motor has driven 20km then off onto dyno to get tune. Quick tune it made 148kw atw. So who said aussies can't build b20/vtec? Still
need to do cam timing as its off. Looking at around 150-155kw atw.

*We "break-in" the engine on the dyno*

Dyno graphs will be up with the final tune is done.

BIG thanks to DYNODAVE for tuning/building and compling this motor package together. Also thanks to Scott at Insight motorsport for helping out on the dyno:thumbsup::thumbsup:

Off to 1/4mile very soon. Times will be posted.

So beware K swap cars!!:honda::honda::honda:*motor is sold to a lucky Queenslander*

[EG5]

Nice built , let us know how it goes down the 1/4 mile.
Easy 12 sec pass for sure

[Elwood]

what shell are you putting this in?

also, what are the torque figures from the b20vtec setup??

150-155 atw is feeiirrcceeee..

[snappy_]

Makes me wanna get back into a NA car now..
Good work guys!

[fatboyz39]

Nice built , let us know how it goes down the 1/4 mile.
Easy 12 sec pass for sure

Thanks dude. Will psot up times 2mrw night.


what shell are you putting this in?

also, what are the torque figures from the b20vtec setup??

150-155 atw is feeiirrcceeee..

EG Hatchback shell. No torque figures as yet.


Makes me wanna get back into a NA car now..
Good work guys!

Just do it!! we'll build ya one ;)

[mrfsport]

what comp pistons, nice build good luck

[fatboyz39]

what comp pistons, nice build good luck

11:1 comp.

[grumpy rooster]

Thats a decent setup. :thumbsup:

[OB]

Very nice!!! Good work DD and team :thumbsup:

what box is being used?

[fatboyz39]

Very nice!!! Good work DD and team :thumbsup:

what box is being used?

CTR gearbox 4.4 FD with CUSCO 1.5way LSD.

Thanks OB.

[fatboyz39]

Thats a decent setup. :thumbsup:

thanks. Very simple setup but works great.

[barefootbonzai]

Good work boys.

[SPEEDCORE]

So who said aussies can't build b20/vtec?

Haha :thumbsup:


*motor is sold to a lucky Queenslander*

*I'm turning green* :(

[zco]

sick ass motor jimmy ! let the 12's roll in !

[BlitZ]

sounds like a solid combo..

[BlitZ]

what is a Rocket Motorsports Valve Job?

who is rocket motorsports? Rocket industries?

[SPEEDCORE]

Rocket Motorsports is US based honda aftermarket parts/tuning/ also development from memory.

Rocket Industries is just an Australian based automotive parts distributor, rather large one at that.

[Benson]

what is a Rocket Motorsports Valve Job?

who is rocket motorsports? Rocket industries?

Mis typo....Redline motorsport valve job.

[DR HONDA]

This is to be expected from Australia's most credited honda engine developer. Well done Dyno Dave its good to see people in AU pushing forward with the power of :honda:. :thumbsup:

[ginganggooly]

A bit of chrome in action too i see, great stuff.

Fingers x'd is runs a high 11 when it's all finished.

[snappy_]

Thanks dude. Will psot up times 2mrw night.



EG Hatchback shell. No torque figures as yet.



Just do it!! we'll build ya one ;)

Lol, to build me an engine like this, i'd have to beg on the streets for a lifetime to be able to afford this set-up!

[Tu88y]

Dave as I said on the phone your nuts

hehehehehe

Honda power of dreams

[Klayemore]

That's better than mine :( :p

[mrfsport]

so did you run the 1/4

Also what does it rev to 8500rpm

[Benson]

so did you run the 1/4

Also what does it rev to 8500rpm

rev's to 8800rpm.

Quater mile time in 2 weeks.

[fatboyz39]

That's better than mine :( :p

You could always upgrade:thumbsup:


so did you run the 1/4

Also what does it rev to 8500rpm

We pushed it to 8800rpm on the dyno. Why does it rev that high? Cause it still making power.


Dave as I said on the phone your nuts

hehehehehe

Honda power of dreams

Time for B20/vtec.

[b18c_crx]

so how much does a set up like this cost around?

[fatboyz39]

so how much does a set up like this cost around?

cheaper then k swaps.

[Elwood]

<10k IOW :P

[Mattski_VTIR]

Great work Guys :thumbsup:

[Tu88y]

You could always upgrade:thumbsup:



We pushed it to 8800rpm on the dyno. Why does it rev that high? Cause it still making power.



Time for B20/vtec.

Let me get mine tune first and see how much power I'm making with new setup

[mrfsport]

rev's to 8800rpm.

Quater mile time in 2 weeks.

Hope it does well, also you running oversized valves or standard.
8800 is pushing it on standard block,
i think you getting the extra power through the TODA header and straight through exhaust with no cat, what brand exhaust

[Benson]

TODA headers are good so far. As for exhaust, its all legal with a 3inch CAT and 2 inline resonator. Exhaust was custom made from Hakan @ Performance Exhaust, they did an good job on it

All standard size valves.

[jdmTYPE R]

very nice guys getting better and better now hey.

[fatboyz39]

Hope it does well, also you running oversized valves or standard.
8800 is pushing it on standard block,
i think you getting the extra power through the TODA header and straight through exhaust with no cat, what brand exhaust

standard valve. 8800 is on its limit, but if it built properly then i don't see any issues with it. We finding toda headers are too small for the b20 setup's, need some big tube ones.

[grumpy rooster]

What diameter are the Toda headers? Are they stepped?

[fatboyz39]

yes there steeped. No idea on dimensions.

[fatboyz39]

What diameter are the Toda headers? Are they stepped?

jsut check on toda thread

http://www.ozhonda.com/forum/showthread.php?t=78894