PDA

View Full Version : Accord Badging



Element12
28-12-2007, 06:12 PM
Hey all

I own a 94' Honda Accord and with the standard badging, chrome cut out badge on the bonnet and the standard Honda badge on the back (chrome and gray background)

With the Honda Integra's they have a chrome badge with a red background i was curious is it possible to put the Integra badge onto a accord ?

This is to replace the rear badge on the boot, not the front bonnet one.

Back: http://img528.imageshack.us/img528/9250/img1579sy6.jpg
Front: http://img101.imageshack.us/img101/4488/img1576fi4.jpg

Riviera
31-12-2007, 09:28 AM
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&Item=120202477672&Category=102337&_trksid=p3907.m29

this guy reckons they fit accord 90 to 97...

Joeyboy
31-12-2007, 03:10 PM
I have the integra badge on my cd5. but the previous owner was the one who installed it (i bought the car with them on). so i guess...YES (?)

FAT VTI
01-01-2008, 06:23 PM
Hey all

I own a 94' Honda Accord and with the standard badging, chrome cut out badge on the bonnet and the standard Honda badge on the back (chrome and gray background)

With the Honda Integra's they have a chrome badge with a red background i was curious is it possible to put the Integra badge onto a accord ?

This is to replace the rear badge on the boot, not the front bonnet one.

Back: http://img528.imageshack.us/img528/9250/img1579sy6.jpg
Front: http://img101.imageshack.us/img101/4488/img1576fi4.jpg

yes, this badge will fit onto your bootlid.
It has the two holes , you just have to replace the badge.

For future reference, the badges saying "accord" or "vti-s" or "vti" or "exi" depending on your model ,are kind of glued on only (double sided tape stuff)
If you are ever wanting to take these off, then you use some fishing line, (if ur careful a small chisel) and take off the badge, then use some de'solve it solution or some other chemical to get the sticky glue off.

Another tip for anyone wanting to debadge their accord badges, USE A HAIRDRYER(BLOWDRYER) carefully heat the glue (after taking off the badge ofcourse) for a minute or two, it becomes soft, and just pick it off carefully, this technique will take about 2minutes, and should be able to just about get rid of all of it.

Sean
p.s. new to forum, I need a quality point