Nasty Marks/Scratches... how to fix??

[Riviera_TypeS]

I got these nasty marks and scratches on the right door. They're already there when I bought them, the previous owner wasn't that sure how did that happen, but she said probably due to shopping trolleys :eek:

http://i130.photobucket.com/albums/p267/Razormunchies/Copyof29122007313.jpg
http://i130.photobucket.com/albums/p267/Razormunchies/Copyof29122007312.jpg

I considered these marks as minor defect as they're barely visible from like 1 metre away :) most likely due to metallic nature of the paint, but still annoying each time I saw them!

Polishing doesn't work as I've tried.

Anyway I can remove these?

Nb: Mods I don't know where this thread belongs so feel free to move it to appropriate section

[turbo convert]

your in perth i see so can really refer you but just call touch up guys and it will be as good as new!!! prob cost you $50-80 why not do the whole car while your at it will cost maybe $120
goodluck

[Riviera_TypeS]

your in perth i see so can really refer you but just call touch up guys and it will be as good as new!!! prob cost you $50-80 why not do the whole car while your at it will cost maybe $120
goodluck

What would be that "touch up guys"? Can you link?

I would do the whole car if I have a chance....

[Riviera_TypeS]

Oh I found the site :)

[xntrik]

scratch x is your friend.

[honda_zivic]

^yep meguiar scratch x shud do it.

[Riviera_TypeS]

I thought Scratch X only works for light scratches/marks?

Aren't they kinda of "heavy"?

I'll give it a try

[EuroDude]

Scratch X is a heavy Polish and abrasive for surface blemishes, which means it removes some of the clear coat to make the clear coat the same level as the scratch.

This works ok for minor scratches, but if its too deep, then you would need to get it done professionally using a pro-formula, or if its very deep and damaged the actual paint layer / undercoat underneath the clear coat, you may need to get the panel resprayed if you want the job done properly.

[Riviera_TypeS]

Ok so I bought Maguiars Scratch X today from Repco (they had 20 percent discount on all detailers!)...

I applied a drop on top of one scratch and swirled it around... walah... nothing... it's still there... even a light scratch on the trunk lip doesn't budge... and I just realised that I waxed the car 1 month ago... full body wax... Probably this doesn't work because the scratches are still coated under the wax...

How do you remove these wax? Does scrubbing work? Argh... just when I am about to fix those bloody marks!!! If you know quick/alternative way of removing section of the wax, it would be awesome!!

[EuroDude]

You can buy wax remover from auto shops, but a heavy polish should remove the wax anyway.

To remove minor scratching/swirling, you can use a heavy polish and lambswool. This will basically remove a layer of clear coat.

Have a look at this thread: http://www.ozhonda.com/forum/showthread.php?t=80625


The scratches on ur car look deep, so lightly wiping the scratch with scratch-x wont do anything.

You need to vigorously rub it in for a long time to remove the surrounding clear coat with lambs wool polishing mit (or use a buffing pad with a rotating power tool). If the scratches are deeper than the clearcoat, you will need to get it done professionally.

[Zilli]

scratch x is a good, but very mild product and when applied by had does really nothing much at all... you need to attack your scratches with a randm orbital or a machine buffer of some sort with some proper swirl remover... start with a light grade compound to start with and get harder if it doesnt work. Remember to polish and wax afterwards

[sretocz]

Dude, just run your finger over the scratches and check if its deep or just a surface scratch. Ive got a fair few scratches on my car and I can tell you that you really need to go see somebody who knows their way around paint if you really wanna get em off.

[FAT VTI]

lol,

Did you use some elbow grease champ?

Does it say on the product "cut and polish"
LOL,

as said above, run ur finger over it, feel how deep it is, you determine how deep it is by roughly how many (if any) coats the scratch/cut has been impacted into the panel.
If it is really bad (which i do not think it is) purchase some touch up paint from ur dealer, will prob cost bout 20bucks for 15mL, and search for the thread about using the stuff PROPERLY.
but i still reccomend you try a bit harder with the polish!.
Sean

[Riviera_TypeS]

lol,

Did you use some elbow grease champ?

Does it say on the product "cut and polish"
LOL,

as said above, run ur finger over it, feel how deep it is, you determine how deep it is by roughly how many (if any) coats the scratch/cut has been impacted into the panel.
If it is really bad (which i do not think it is) purchase some touch up paint from ur dealer, will prob cost bout 20bucks for 15mL, and search for the thread about using the stuff PROPERLY.
but i still reccomend you try a bit harder with the polish!.
Sean

So I need to apply more and rub it hard?

I haven't use any elbow grease so far... I thought mild rubbing would work... I only use the index finger to rub it off... I don't have tools to play with and perhaps if not required I won't need to buy one.. cost me bucks..

[FAT VTI]

yeah, it takes a fair bit of elbow grease man,

I got some light scratches off my boot lid, by using ummmmmm polyglaze cut and polish (i think)

Doesnt need much application at all, you just have to do a circle motion with the big circle foam peice u get with the product, go round in circles and have a real go.

Thats how i did it, I think they are just clear coat scratches, therefore wouldnt require touch up paint.

Personally, i do not think touch up paint should just about ever be used, there are so many things that can go wrong if it is not applied right that it just isnt good to use if you want a really decent finish.
anyways, its a grey car, it should be able to be taken off.

Sean
p.s. if you want me to find the product i used then i'll have a look and get back to you, just pm me

[dsp26]

^^^yep

but pics in the first post look deep.. like beyond the paint... looks like undercoat... wanna post up some real up close macro shots from an angle?

Oh and the seller damn well knew it wasn't trolleys that caused it, look how they curve... they were consistently hit with the door of another vehicle.

[Gio]

i have that scratch x and it is craaaaaaaaaaap. Such a good brand though, just this product sucks.

I recommened that you get it professionally (sorry about the spelling) done, nothing will look better. Could someone recommened a business that does this?

[FAT VTI]

most workshops that specialise in paint would prob do it , however they might go all out, sand it, prime it and repaint it which will equal alot of cash.
If you dont get scammed, then it will prob give u a better finish

However i'd still do it urself.
i think i used polyglaze cut and polish.

Sean

[ngc2359]

they look like car park battle scar to me. i can't stand people opening their doors into your car. and most sports car don't have the horizontal plastic strip to protect against that.


I got these nasty marks and scratches on the right door. They're already there when I bought them, the previous owner wasn't that sure how did that happen, but she said probably due to shopping trolleys :eek:

http://i130.photobucket.com/albums/p267/Razormunchies/Copyof29122007313.jpg
http://i130.photobucket.com/albums/p267/Razormunchies/Copyof29122007312.jpg

I considered these marks as minor defect as they're barely visible from like 1 metre away :) most likely due to metallic nature of the paint, but still annoying each time I saw them!

Polishing doesn't work as I've tried.

Anyway I can remove these?

Nb: Mods I don't know where this thread belongs so feel free to move it to appropriate section