Exhausts in EG/EK's

[p-rex]

Hey all,

was just wandering what kinda exhaust setup people got on their EG/EK's and how noisy it is..

i've got an EG with B18 and looking do re-do my exhaust as it is way too loud.

Would like to hear any suggestions/recommendations anyone has...

thanks in advance

[Encor3]

Probably do a search would get you some pretty good answers

Just get 2.5inch mandrel bend , reasonators, and a twinloop.

[dsp26]

Hey all,

was just wandering what kinda exhaust setup people got on their EG/EK's and how noisy it is..

i've got an EG with B18 and looking do re-do my exhaust as it is way too loud.

Would like to hear any suggestions/recommendations anyone has...

thanks in advance

Just a tip to make it consistent.. this is my official sound test result:
Engine: B16a2
Extractors: Stainless steel 4-1 with 2.5inch collector
Catalyst: Stock and stock diameter flange
Resonator: 18in Hotdog
Catback: 2.5in mandrel
Muffler: OEM EG (damaged and buzzing)
@5,700rpm: 88dB
Throttle-Off: 91dB

Above with 2.5in 300cell metal cat
@5,700rpm: 90dB
Throttle-Off: 97dB

All the above and Oval muffler same size as OEM and Y-Flow design with 2.5in inlet and 2.5outlet w/ 4.5in tip
@5,700rpm: 98dB
Throttle-Off: 101dB

"Average" sound with Cannons and nothing else (according to sound testers) on most 4cyl cars 2.0l and under...
@5,700rpm: ~106dB

"Stock Civics & Integras" were apparently between 80-84dB

[p-rex]

Encor3, what kinda twinloop have you got?

how do you like the noise level?