PDA

View Full Version : OBD or OBDII on 95 honda accord?



deepdey
14-01-2008, 11:23 PM
Hi could anyone please tell me if my 95 honda accord has OBD or OBDII on it or if they know where the port is? Is it possible to get after market OBDII installed or anything??

Thanks

EuroDude
15-01-2008, 08:53 AM
ODB2 was released in cars around 1996 so your 1995 model may just have ODB1, especially if your chassis was release earlier than 1995.

The way to check is to have a look at the connector under the dash on the passenger side near the door (under the glovebox).

If you find this connector, its ODB2
http://upload.wikimedia.org/wikipedia/commons/thumb/8/85/OBD_002.jpg/270px-OBD_002.jpg

Otherwise if you find a simple 2pin connector (should be green or brown if I recall correctly), then its ODB1.

You can buy OBD2 readers from eBay for about $30+

Not sure if you can upgrade from ODB1 to ODB2. I assume you would need to install a later ECU, change some harnesses, etc..

ECU-MAN
15-01-2008, 04:35 PM
95 will be OBDI,

AUDM do not have the OBDII connector