Dc2 VTiR brakes onto Ek1 CXi

[1996ek1]

Will Dc2 VTiR front disc's + rotors be a dirrect swap for my Ek1 CXi front brakes?

Or do i need some other parts?


Edit: Disc's and calipers**. Lol, i didn't realise i wrote discs + rotors :o

[Sydsyd]

most likely u'll need DC2 calipers too...i think DC2 and EK4 share the same rotor size (262mm)...

ps: discs and rotors are the same thing :D

[[[d a n n y]]]

they are pretty much bolt on..
i have SIR/VTIR brakes if your intrested

[blk_shadow]

];1508032']they are pretty much bolt on..
i have SIR/VTIR brakes if your intrested

how much are u selling them for? front and rear? or just front?

[Benson]

If you look at them closely, they are exactly the same size.

Your better off saving your moeny and upgrading to type R brake calipers and rotors.

[1996ek1]

I already purchses front+rear calipers, with front disc's.
I was told they should be a dirrect swap, but i was also told i'll need the Dc2/Ek4 knuckle.

And benson, how can they be same size, CXi are 240mm and Dc2/Ek4 are 262mm. Wouldnt the caliper have to be bigger?

[bennjamin]

I already purchses front+rear calipers, with front disc's.
I was told they should be a dirrect swap, but i was also told i'll need the Dc2/Ek4 knuckle.

And benson, how can they be same size, CXi are 240mm and Dc2/Ek4 are 262mm. Wouldnt the caliper have to be bigger?


the EK sedans have 262mm rotors ~ as do some CXi hatchbacks too (later ones i think?) - measure it yourself and tell us :)

[Limbo]

later model 2000+ civics are the same as the ek4 & Dc2(earlier model).
I did a change in a GLI and it was exactly the same

[1996ek1]

Well mine is built Aug 95' so it has 240mm.
I guess ill just go for the swap and see if its dirrect fit because some say yes some say no...