auto to manual conversion

[n.ltd]

brief outline of what is needed and costs?
anything to watch out for?

cheers

[XP02ED]

ECU
Shift Linkage
gearbox
clucth and master cylinder
cluster ( optional )
Pedals

thats off the top of my head

[teh_mechanic]

interior gearstick surround console piece is probably different too,if you wanna get picky about it

[B18cEG]

i have done this swap in to an eg, all the above will be needed, and wiring, only the passanger side engine mount will line up and you need to get a gearbox mount welded up, if you can get a manual crossmember that helps otherwise you can get the rear mount welded on, the radiator can be used but you just need to undo the transmission lines.thats pretty much it

[n.ltd]

how much did all this cost ya? + labour.

[B18cEG]

hardly anything i was surprised, took it to a place in perth called Evolution-R
and he charged me $250 to make the gearbox mount and weld the rear mount, as for everything else i cant tell you of the cost, i did it all myself.

[Benson]

To get a car converted to Manual you'll be looking at 1-2k. PM if you need parts

[`OzLude]

To get a car converted to Manual you'll be looking at 1-2k. PM if you need parts


is that 1-2k completed? back on the street.
or is that for all the parts required?

[n.ltd]

same question as above.

how does it vary aswell? condition of parts?

[simonnowis]

you'll prob need to do alot of the work yourself so be prepared for hours of labour.

[BaNaNaMaN]

Innovative make an Auto > Manual gearbox mount so all other mounts remain stock.

www.innovativemounts.com

[Benson]

is that 1-2k completed? back on the street.
or is that for all the parts required?

It all depend on how much parts will cost you. Then labour would be around the 600-800 to convert.