any help..

[evilclown]

i got my front lip today and thats a PU.but i dont knw how to install...mmmim just wondering how much is cost me if i get a profesional to do it??? any1?? cheers!

[rayb3na_]

DIY man =]

[95civic]

I wouldnt say you need a professional to fit it, usually is is only maximum 6 screws, thin foam and your done. 2 screws in each wheel arch and possibly two along the front if required.

[jeansey]

yer i was the same as u when i got my lips. i ended up doing it myself and it was really easy. and ive had no problems yet.

[rawr]

get a friend to help, a drill and u should be sweet

make sure its positioned where u want it or it'll be hell

it helps if the friend has previous experience

[hai]

two screws on each side ftw and double sided tape for the middle

if its ur first time then

get a friend to hold the left
another friend to old the right

and you stand back and look at it to its position you like it and tell them to hold it still , while you start drilling to the exact same position you saw it..

good luck cheers

[evilclown]

true...but the lip is doesn't fit perfectly..its a bit long tho..a ask my cousin to help me...i wish he can help me...lol.or any1 in springvale can help me? i want to try it first before i paint it..

[simonnowis]

is it a replica? replicas rarely fit up perfect.
if its bit too long def put in sound double sided tape to prevent it ripping off.

[dupac->]

get a friend to help, a drill and u should be sweet

make sure its positioned where u want it or it'll be hell

it helps if the friend has previous experience
lol you're welcome andre
hehe

...



use screws on each end of the lip. screw it onto the bar..

use urethane to stick the lip where it sags or any gaps.. use tape to hold it in place until it dries.. urethane holds it shape better than double sided tape imo..

make sure you use the urethane clean.. it makes mess haha! just have some thinners on hand and its easy

[dupac->]

dont use screws on the outside of the lip.. looks chatty.. put screws in where you cant see it. obviously.
lol

[evilclown]

yup! its replica... i already installd my rear lip....but the front lip is still there thinkn how to instll...i knw i need to screw and use some double sided tape.. but how can i start...any diy how to do it???