tuning b18c

[sam.]

hey just a quik question about what to expect from tuning my jap spec b18c (98)

current mods:
2.5 mandrel bent cat back with hi-flow cat and flex pipe
stock headers
pod filter
70mm TB

i have a apexi fc with controller and want to get it tuned ( maybe 101motorcafe) and was wondering what to expect power wise? is 125 wheel kw's asking to much??? i have no idea, any help would be appreciated

[Benson]

This is what i will get change and buy:

New set of headers - Tri Y desgin roughly 600bucks
Sell of the 70mm t/b and get yourself a 65mm t/b
Get a decent Long ram intake -Injen or AEM

With those mods you'll get close to 125kw. At the moment, with those mods i reckon its will be hard to hit 125kw atw

[aaronng]

i have a apexi fc with controller and want to get it tuned ( maybe 101motorcafe) and was wondering what to expect power wise? is 125 wheel kw's asking to much??? i have no idea, any help would be appreciated

Put your car on the dyno and find out.

[teaseR]

but when dyno figures are not consistant then any number is just a number.
its like saying my car 150kwatw at one dyno and another is 110kwatw.
too many variables to get a power number on a dyno.
i would only use a dyno for a tune but not to see how many kw i get.
to what i see the best indication is the time for 1/4 mile run.
own ability to drive + power to weight = good times

[AKmotorworks]

Agree, our 105kw cars are consistently in the 13's.

[sam.]

well it's a stripped out crx, the one that for sale in my sig

[Tu88y]

this seems like a sale thread
hahahahaha

wait for this to be close

[sam.]

it's not, i'm currently selling both cars i own, but will most likely end up keeping the crx and continue modfiying it!

[acool]

u looking around 115kw,but aslo dpen the weather on the day!

______________

Mugen and Spoon parts for sales!

[xtercii]

with right i/e/h combo and ecu tune you can get 135kw+ for your type r motor...

[sam.]

and whatis that combo? lol

[fatboyz39]

xtercii your motor is a freak LOL...

Expect anywhere from 115-125kw atw.

[BlitZ]

^^ damn... what IHE did u use and on what Dyno.. thats nuts man.

[Tu88y]

must be a high reading dyno
hahahahaha

Well I got I,H and E but not making no where near there

[xtercii]

dtr/ssr header, mugen intake, 2.5in exhaust with spoon n1 muffler, 65mm TB, power fc and of cos Dave's tune at Belgarage.

[Tu88y]

what cams

[xtercii]

That's all, only only bolt on breathing mods.

[EG5]

with right i/e/h combo and ecu tune you can get 135kw+ for your type r motor...

damn you are only 3kw @ wheel less than my K24A .
SSR Header FTW

[barefootbonzai]

well done man, that's some excellent results. You get what you pay for!

[sam.]

also who/where would be the best place in brizzy to get it tuned? i've heard good things about 101 motorcafe and unless there's somewhere better i'll go there

[ALLMTR996]

also who/where would be the best place in brizzy to get it tuned? i've heard good things about 101 motorcafe and unless there's somewhere better i'll go there

PM the guy that posted above you he has someone that does Honda tuning in Brisbane.
ALLMTR996

[kazam]

good thread, bump!

[EURON8]

what's the dyno reading for a stock itr engine on belgarage? 125kw? haha....

[Benson]

Try it out for yourself only $50 for a dyno run