mods for b16a

[ef-civic]

atm has stage 2 cams. CAI. fuel pressure regulator. what else can i put on to make go better.. has stock headers.. and 1.5 inch exhaust..

[hooyn]

change the headers and exhaust =P

[ACTI0NMAN-1]

replace the driver

[czy_sol87]

u did cams but not the most basic mods.......get decent headers and either a 2.25" or 2.5" exhaust depending on what ur after, and a tune
then u can look at getting the "power" down with a HD clutch and lightweight flywheel and some decent tyres(or u can just do the tyres, up to u)

[ptran]

the best thing is to get an engine swap to b18cr and that will make your head spin...vrooooooooooooooom!

[AsH_]

agree with headers and exhaust.

I/H/E most basic modifcations to gain some power.

[[[d a n n y]]]

and then ecu and tune

[Mrgigolo]

Yeh man...

Just do the exhaust, headers, ECU then tune it :D

Then if you want more power slap on a turbo :D Watch it fly :D :thumbsup:

[Limbo]

headers, steel cat & 2 1/4" mandrel exhaust.
Will bring it to life with what you already have

Then as Danny said ecu & tune.

[dsp26]

actually.. i have to ask, a lot of people say "Stage 1" or "Stage 2" so freely like their playing need for speed...

Stage 2 cams of WHAT BRAND so we know what the duration/lift specs are...

***EDIT***
either way everyone is right.. you already missed the basic mods.. but then again if i had to do it the 2nd time around, i'd do it your way... i'd get the cams i want first then find the matching I/H/E... i always said spending on exhaust twice coz you ****ed up is a big no no... i ****ed up coz i went to a shit place and will never get custom ever again...

[ef-civic]

i bought the car as it sits ffs